{"title":"BMW E46","description":"\u003cp\u003eThe E46 has been gaining ground in drifting and circuit racing thanks to its stiffer chassis and the wide range of parts available. Here is everything you need to prepare it: angle kits, adjustable rear arms, subframe reinforcement plates, coilovers, exhausts, and hydraulic handbrakes.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/collections\/carroceria-bmw-e46\"\u003ebodywork for the BMW E46\u003c\/a\u003e (hoods, M3 and GTR replica fenders, wings, and CSL hatches) has its own page. The E46 rear subframe is a known weak point, and if you plan to push it, it is best to reinforce it before cracks appear.\u003c\/p\u003e\n\u003cp\u003eAlways check whether the part is suitable for the M3 or only for the other versions, as many dimensions differ. If you have any doubts, ask us and provide the exact version of your car.\u003c\/p\u003e\n\u003cp\u003eSeparately, you will find the \u003ca href=\"\/en\/collections\/chasis-bmw-e46\"\u003eE46 chassis and geometry\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/refrigeracion-bmw-e46\"\u003ecooling\u003c\/a\u003e, and \u003ca href=\"\/en\/collections\/escapes-bmw\"\u003eBMW exhausts and headers\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo go straight to a specific range of parts, check out the \u003ca href=\"\/en\/collections\/suspension-roscada-bmw-e46\"\u003ecoilovers for the E46\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/silentblocks-bmw-e46\"\u003ebushings\u003c\/a\u003e, or \u003ca href=\"\/en\/collections\/arcos-seguridad-bmw-e46\"\u003eroll bars and cages\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"barra-de-torretas-delantera-bmw-e46-6-cil","title":"Front tower bar BMW E46 (all engines except M43 and M3)","description":"\u003ch3\u003eWhat does the strut tower brace do in the E46?\u003c\/h3\u003e\n\u003cp\u003eThe E46's front strut towers are the two sheet metal areas in the engine bay where the top of each shock absorber is bolted. In the McPherson suspension fitted to this car, a large part of the wheel load passes through them. The two towers are separate, so when cornering hard or braking with a loaded car, the bodywork flexes slightly between them. The wheel's camber changes as it works, and the steering loses that direct feel the E46 has when it is in good condition. In high-mileage cars, the flex is greater and more noticeable.\u003c\/p\u003e\n\u003cp\u003eThe brace connects the towers above the engine so that they move together. The front end maintains its alignment under load, turn-in is cleaner, and the steering provides better feedback about grip. It also distributes the stress across the sheet metal of the towers, which on E46s used for track days or drifting can open up around the mounting points.\u003c\/p\u003e\u003c!--h3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eThe central tube is made of 40 x 20 mm oval steel with a 3 mm wall thickness. It is a very rigid profile against lateral flex and keeps the brace low over the engine.\u003c\/p\u003e\n\u003cp\u003eThe tower mounts are laser-cut and CNC press-bent, so they sit flat against the bodywork. Their holes are countersunk and reinforced at the edge so they do not bend when tightening the nuts. It is MIG\/MAG welded on a fixed jig, so all braces come out with the same dimensions and fit without forcing. The finish is black powder coating, resistant to heat, oil, and engine bay moisture.\u003c\/p\u003e\n\u003cp\u003eTested in E46 drift and rally cars.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFor the BMW E46 in all its body styles (sedan, Touring, coupé, convertible, and Compact) and with any engine, except the four-cylinder M43 (316i and 318i from the early years) and the M3. It includes the four-cylinder N42 and N46, the six-cylinder M52 and M54, and the diesels. For the M3 E46, you have the \u003ca href=\"\/en\/products\/barra-de-torretas-delantera-bmw-m3-e46\"\u003efront strut tower brace for BMW M3 E46\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor BMW E46 sedan, Touring, coupé, convertible, and Compact\u003c\/li\u003e\n\n\u003cli\u003eAll engines except M43 and S54 (M3)\u003c\/li\u003e\n\n\u003cli\u003e40 x 20 mm oval steel tube, 3 mm thick\u003c\/li\u003e\n\n\u003cli\u003eMIG\/MAG welding on a jig and black powder coating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50767635939662,"sku":"DGSW46.11","price":78.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/barra-torretas-delantera-bmw-e46.jpg?v=1793016326"},{"product_id":"barra-de-torretas-delantera-bmw-m3-e46","title":"Front strut tower bar BMW M3 E46 (S54) coupe and convertible","description":"\u003ch3\u003eWhy the M3 E46 appreciates it\u003c\/h3\u003e\n\u003cp\u003eThe M3 E46 is powered by the S54, a 3.2-liter six-cylinder that is heavier and bulkier than the engines in the rest of the range, and features suspension geometry designed for speed. All the loads from the front end travel up the shock towers, the two areas of the bodywork where they are mounted from above. Under hard braking and high-speed cornering, the towers move slightly relative to each other because they are only connected by the car's sheet metal. This movement alters the wheel camber at the worst possible moment and compromises the precision of steering that should be very direct in the M3.\u003c\/p\u003e\n\u003cp\u003eThe bar connects the two towers above the engine and forces them to move together. The front end retains its geometry under load, the front end enters corners more precisely, and the steering better communicates the grip limit. In a car that often sees track use, it also helps prevent the sheet metal around the tower mounts from fatiguing.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eIt is made from 40 x 20 mm oval steel tubing with a 3 mm wall thickness. This section is highly rigid against lateral forces and allows the bar to pass low over the S54.\u003c\/p\u003e\n\u003cp\u003eThe tower mounts are laser-cut and bent in a CNC press so that they sit flat, and their holes are countersunk and reinforced at the edges to prevent deformation when tightened. The welding is MIG\/MAG jig-welded, so all bars are made to the same dimensions and fit without force. The finish is black powder coating, which withstands the heat of the engine bay, oil, and moisture.\u003c\/p\u003e\n\u003cp\u003eTested in drift and rally cars.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFor the BMW M3 E46 with an S54 engine, both coupé and convertible. For the rest of the E46 range, you have the \u003ca href=\"\/en\/products\/barra-de-torretas-delantera-bmw-e46-6-cil\"\u003efront tower bar for BMW E46\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor BMW M3 E46 coupé and convertible (S54 engine)\u003c\/li\u003e\n\n\u003cli\u003e40 x 20 mm oval steel tubing with a 3 mm wall thickness\u003c\/li\u003e\n\n\u003cli\u003eLaser-cut and CNC-bent mounts, with countersunk holes\u003c\/li\u003e\n\n\u003cli\u003eJig-welded MIG\/MAG and black powder coating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50767635972430,"sku":"DGSWM346.11","price":78.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/barra-torretas-delantera-bmw-m3-e46.jpg?v=1793016326"},{"product_id":"barra-de-torretas-trasera-bmw-e46","title":"Rear tower bar for BMW E46 coupe, sedan, Touring and Compact","description":"\u003ch3\u003eThe rear of the E46 also flexes\u003c\/h3\u003e\n\u003cp\u003eIn the E46, the rear shock towers are mounted at the top to two towers located in the trunk, one on each side, behind the rear seat backrest. This is where a significant portion of the forces from the multi-link rear axle is transmitted when the car accelerates, is loaded in a long corner, or, in drifting, when the rear slides and regains grip. The two towers are only joined by the bodywork itself, so they move slightly with every load. This alters the rear axle geometry and results in a less stable rear end and more inconsistent traction when exiting corners.\u003c\/p\u003e\n\u003cp\u003eThe bar connects the two rear towers and fixes them together. The rear axle maintains its alignment even under load, power is delivered to the ground more consistently, and the rear end's reactions are easier to anticipate. If combined with the front bar, the body gains rigidity on both axles and the car turns more evenly. Furthermore, in high-mileage E46s or those used for drifting, it reduces fatigue in the sheet metal around the rear mounting points, an area that should be monitored in this model.\u003c\/p\u003e\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eIt is made from 40 x 20 mm oval steel tubing with a 3 mm wall thickness. This section resists lateral flexing very well and takes up almost no space in the trunk. The tower brackets are laser-cut and bent in a CNC press so that they sit flat, with countersunk holes to prevent them from yielding when tightened. The welding is MIG\/MAG jig-welded, so all bars have the same dimensions and fit without force, and the finish is black powder coating, resistant to impacts and rubbing from cargo.\u003c\/p\u003e\n\u003cp\u003eTested in drift and rally cars.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFor the BMW E46 Coupé, Sedan, Touring, and Compact. For the front, you have the \u003ca href=\"\/en\/products\/barra-de-torretas-delantera-bmw-e46-6-cil\"\u003efront tower bar for the E46\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/barra-de-torretas-delantera-bmw-m3-e46\"\u003eversion for the M3 E46\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor BMW E46 Coupé, Sedan, Touring, and Compact\u003c\/li\u003e\n\n\u003cli\u003e40 x 20 mm oval steel tubing, 3 mm thick\u003c\/li\u003e\n\n\u003cli\u003eLaser-cut and CNC-bent brackets with countersunk holes\u003c\/li\u003e\n\n\u003cli\u003eJig-welded MIG\/MAG and black powder coating\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771083952462,"sku":"DGSW46.12","price":57.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/barra-torretas-trasera-bmw-e46-vista-1.jpg?v=1793016690"},{"product_id":"kit-barra-de-torretas-delantera-y-trasera-bmw-e46","title":"Front and rear tower bar kit BMW E46","description":"\u003cp\u003eFront and rear strut bar kit for the BMW E46 in its sedan, Touring, coupé, and Compact body styles. It is compatible with almost the entire range of gasoline and diesel engines. The only exceptions are the four-cylinder M43 and the S54 from the M3.\u003c\/p\u003e\n\n\u003ch3\u003eWhat a strut bar does\u003c\/h3\u003e\n\u003cp\u003eStruts are the points on the body where the shock absorbers rest, and a good part of the car's weight passes through them. In a corner, the outer strut receives much more load than the inner one, and the sheet metal flexes slightly. That small deformation changes the wheel camber and delays the steering response.\u003c\/p\u003e\n\u003cp\u003eA rigid bar between the two struts distributes the stress between both sides. The front end maintains its alignment when the car is under load, and the steering wheel better conveys what the wheels are doing. On the rear axle, the bar stabilizes the rear support, which is exactly what is sought in a rear-wheel-drive car.\u003c\/p\u003e\n\n\u003ch3\u003eWhy on an E46\u003c\/h3\u003e\n\u003cp\u003eThe E46 was born with a fairly rigid chassis for its time. Over time and with mileage, however, the body joints fatigue, and in cars used on the track or for drifting, this loss is noticeable sooner. The kit restores firmness to the assembly. If you have also installed coilovers, stiffer springs, or high-grip tires, the loads on the struts increase, and the bar becomes almost essential.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 in sedan, Touring, coupé, and Compact body styles, with all engines except:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eM43 (four-cylinder from the early 316i and 318i versions)\u003c\/li\u003e\n\n\u003cli\u003eS54 (M3 E46), which has its own kit\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt is not recommended for the convertible.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe main profile is a flat oval of steel measuring 40 x 20 mm with a 3 mm wall. Compared to a round tube, this section better withstands compression between the struts and sits lower, so it does not rub against the engine cover or the engine bay ducts.\u003c\/p\u003e\n\u003cp\u003eThe mounting plates are laser-cut and bent on a CNC press brake, so they are all identical and fully support the strut tower. The mounting holes are stamped, a process that hardens the edge and prevents the plate from denting when tightened. The joints are MIG\/MAG welded in fixed jigs by a certified welder to ensure that the bar comes out straight.\u003c\/p\u003e\n\u003cp\u003eFinally, it is powder-coated in black. This finish resists the engine bay temperature and scratches better than liquid paint.\u003c\/p\u003e\n\u003cp\u003eThe bars have been tested in drifting and rallying, with loads on the chassis far greater than those of daily driving.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe stock strut tower nuts are used, without drilling or modifying anything. It is a quick installation done with hand tools. Check the tightening torque after the first few kilometers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771088048462,"sku":"DGSW46.13","price":128.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/kit-barra-de-torretas-delantera-y-trasera-bmw-e46-2.jpg?v=1793348460"},{"product_id":"kit-barra-de-torretas-delantera-y-trasera-bmw-m3-e46","title":"Front and rear tower bar kit BMW M3 E46","description":"\u003cp\u003eKit with front and rear strut bars for the BMW M3 E46 with the S54 engine. The front bar is designed specifically for this model, because the M3 engine bay is completely different from the rest of the E46 range, and the bars for the 320i, 325i, or 330i will not fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhy the M3 needs its own bar\u003c\/h3\u003e\n\u003cp\u003eThe S54 is a 3.2-liter naturally aspirated six-cylinder with six individual throttle bodies and a large intake manifold that fills almost all the space above the engine. The front bar in this kit is routed over that manifold without touching it and without having to remove or relocate anything. The rear bar fits the mounting points of the M3's rear strut towers.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the car gains\u003c\/h3\u003e\n\u003cp\u003eThe M3 E46 has 343 hp, plenty of grip, and firm factory springs, so the strut towers are subjected to high loads during fast driving. At every bump, the outer tower receives more weight than the inner one, and the body flexes slightly. This flex changes the wheel camber just when it matters most for proper contact.\u003c\/p\u003e\n\u003cp\u003eThe two bars connect the strut towers on each axle and make the chassis respond as a single unit. Steering becomes more precise when entering a corner, and the rear end remains more stable when accelerating out of a turn, something that is appreciated in a rear-wheel-drive car with this much torque. In cars that are driven on the track or that are already fitted with coilovers, the reinforcement of both axles maintains the balance that BMW aimed for in the M3's weight distribution.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW M3 E46 with S54 engine (2000-2006). For the other E46 engines, we have a different kit.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eEach bar is constructed with a flat oval steel profile measuring 40 x 20 mm with a 3 mm wall thickness. This section handles the push and pull between the strut towers very well, and because it is lower than a round tube, it helps clear the height of the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe strut tower plates are laser-cut and bent using a CNC press, so they all come out identical and sit flat. The mounting holes are countersunk, which reinforces the edge and prevents the sheet metal from deforming when tightened. The MIG\/MAG welding is done by a certified welder using fixed jigs, so each bar comes out straight and the plates are at the exact angle.\u003c\/p\u003e\n\u003cp\u003eThe finish is black powder coating, resistant to engine bay heat, moisture, and tool impacts.\u003c\/p\u003e\n\u003cp\u003eThese bars have been tested in drifting and rallying, where the bodywork is subjected to much higher stresses than on the street.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are secured using the original strut tower nuts, without drilling or cutting. A simple job with basic tools. Check the tightness after the first few kilometers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771089260878,"sku":"DGSWM346.13","price":128.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/E46M3.jpg?v=1793274304"},{"product_id":"bases-suelo-para-acoplar-bases-asiento-fia-en-bmw-e30-e36-y-e46-piloto","title":"Aluminum bracket for BMW E30, E36, and E46 driver's bucket seat","description":"\u003cp\u003eAluminum platform for mounting a bucket seat on the driver's side of the BMW E30, E36 and E46. It is the lightweight version of our mounting platforms. It bolts to the car floor, and the seat's side bases are fixed on top of it.\u003c\/p\u003e\n\n\u003ch3\u003eComplete seat position adjustment\u003c\/h3\u003e\n\u003cp\u003eThe platform has a large number of mounting holes, allowing the seat bases to be placed in many different positions, forwards and backwards, and also to the sides. This way, each driver can set the seat at the perfect distance from the pedals and the steering wheel.\u003c\/p\u003e\n\u003cp\u003eIn the E36 and E46, this is especially important. The driver's seat in these cars is not perfectly aligned with the steering wheel using the factory mounting points, and the platform can be moved towards the center until it is aligned with the steering column. The driver can drive straight with both arms at the same distance, gaining precision and comfort during long sessions.\u003c\/p\u003e\n\n\u003ch3\u003eLightweight and protected\u003c\/h3\u003e\n\u003cp\u003eBeing made of aluminum, the platform weighs considerably less than a steel one. This is a worthwhile weight saving in time attack or circuit cars, where everything is lightened as much as possible. The finish is black anodized, a treatment that hardens the aluminum surface and protects it from corrosion and wear without adding a layer of paint that could chip.\u003c\/p\u003e\n\u003cp\u003eThis platform has been tested in drift and rally, two very demanding uses for seat mounting.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with our side bases\u003c\/h3\u003e\n\u003cp\u003eIt is designed to be used with our side bases for bucket seats, which are sold separately. Combined with our aluminum bases, the complete assembly is especially lightweight.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E30, driver's side\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, driver's side\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, driver's side\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt is also suitable for semi-bucket seats with side mounts, fitted with our bases. Recommended for drift, rally, rally sprint, quarter-mile drag racing, time attack, and any car prepared for circuit use.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a steel option, we have 3 mm platforms for the E36 and E46, and 4 mm platforms for the E30, E36 and E46.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cp\u003eOne platform for the driver's side. Side bases, seat and hardware not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771092832590,"sku":"DGSW.IZ.19","price":123.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_52915228-e3b7-4b48-90e0-dabfc2cf9605.jpg?v=1793276817"},{"product_id":"bases-suelo-para-acoplar-bases-asiento-fia-en-bmw-e30-e36-y-e46-copiloto","title":"Aluminum bracket for BMW E30, E36, and E46 front passenger bucket seat","description":"\u003cp\u003eAluminum platform for installing a bucket seat on the passenger side of the BMW E30, E36 and E46. It is fixed to the car floor and serves as a support for the seat's side bases. It is our lightest platform, designed for competition cars where weight savings are sought in every part.\u003c\/p\u003e\n\n\u003ch3\u003eThe seat where you need it\u003c\/h3\u003e\n\u003cp\u003eThe surface of the platform is full of mounting holes. The seat bases can be bolted in many positions, moving the seat forward or backward and to the left or right. This way, the bucket seat is well centered in its space, separated from the door and the center tunnel, and the passenger sits straight with the harnesses pulling symmetrically.\u003c\/p\u003e\n\u003cp\u003eIn a rally car, this posture is important. The passenger spends many kilometers reading notes and enduring the same bumps and jumps as the driver, and a well-placed seat makes the job much more bearable.\u003c\/p\u003e\n\n\u003ch3\u003eAnodized aluminum\u003c\/h3\u003e\n\u003cp\u003eAluminum weighs much less than steel, so the platform adds very little weight to the car. Its finish is black anodized, a treatment that creates a hard layer on the surface of the metal and protects it from corrosion and scratches. Being part of the aluminum itself, that layer does not chip like paint.\u003c\/p\u003e\n\u003cp\u003eThe platform has been tested in drift and rally, with much higher loads than those of a street car.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with our side bases\u003c\/h3\u003e\n\u003cp\u003eIt combines with our bucket seat side bases, which are sold separately. If mounted with our aluminum bases, the entire seat assembly is very light.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E30, passenger side\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, passenger side\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, passenger side\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt is also suitable for semi-bucket seats with side mounts, fitted with our bases. Recommended for drift, rally, rally sprint, quarter-mile drag racing, time attack and any car prepared for the track.\u003c\/p\u003e\n\u003cp\u003eFor the driver's side, we have the same aluminum platform in its specific version.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cp\u003eOne platform for the passenger side. Side bases, seat and hardware not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771093324110,"sku":"DGSW.DE.19","price":123.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_6750bbff-21bb-453b-890a-f3297b5cb3a3.jpg?v=1793276868"},{"product_id":"base-baquet-especifica-e36-piloto","title":"Seat bases for BMW E36 and E46 driver bucket seats (400 to 440 mm seats)","description":"\u003cp\u003eSteel bases for installing a bucket seat in the driver's seat of the BMW E36 and E46. They consist of two side brackets that hold the seat by the sides and fix it to the car floor. They fit seats 400 to 440 mm wide, measured between the mounting points on the sides of the seat. The set includes the two brackets, left and right, needed to mount one seat.\u003c\/p\u003e\n\n\u003ch3\u003eSeat centered with the steering wheel\u003c\/h3\u003e\n\u003cp\u003eIn many cars, when replacing the original seat with a bucket seat, the driver ends up sitting slightly offset from the steering wheel. It seems like a minor detail, but it forces you to turn your body slightly, causes fatigue during long sessions, and makes your arms work unevenly. In drifting and circuit racing, where the steering wheel moves a lot and quick corrections are necessary, that crooked posture reduces precision.\u003c\/p\u003e\n\u003cp\u003eThese bases are designed to keep the seat aligned with the steering column axis. The driver sits straight in front of the steering wheel and pedals, with both arms at the same distance, and the harnesses work symmetrically over the shoulders.\u003c\/p\u003e\n\n\u003ch3\u003eHow they are made\u003c\/h3\u003e\n\u003cp\u003eThey are made from 3 mm steel sheet, press-folded using a CNC press. Each bracket features a stamped reinforcement in the sheet itself, a raised rib that makes it much stiffer and prevents it from bending under the loads of hard braking or an impact. The design is simple, with no loose parts or joints that could fail.\u003c\/p\u003e\n\u003cp\u003eThey come with pre-drilled mounting holes and are powder-coated in black, a hard finish that withstands the friction and moisture of the car floor well.\u003c\/p\u003e\n\n\u003ch3\u003eRegulations\u003c\/h3\u003e\n\u003cp\u003eManufactured according to the requirements of FIA Appendix J for competition seat mountings.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36, driver's side\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, driver's side\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eFor bucket seats 400 to 440 mm wide between the side mounting points. Check your seat's measurement before buying, from one side mounting point to the one on the opposite side. We have specific bases for the passenger side.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cp\u003eTwo side brackets, complete set for one seat. Seat and mounting hardware not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771096731982,"sku":"DGSW.IZ.77","price":61.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_7abcc1e6-4649-4420-b10c-50be4dc76f05.jpg?v=1793105106"},{"product_id":"base-baquet-especifica-e36-copiloto","title":"Mounting brackets for BMW E36 and E46 front passenger bucket seat (400 to 440 mm seats)","description":"\u003cp\u003eSteel bases for mounting a bucket seat on the passenger side of the BMW E36 and E46. They consist of two side brackets that hold the seat by the sides and screw into the car floor. They fit seats with a width of 400 to 440 mm, measured between the seat's own lateral mounting points. The set includes the two brackets, left and right, required for one seat.\u003c\/p\u003e\n\n\u003ch3\u003eWhat they are used for\u003c\/h3\u003e\n\u003cp\u003eA competition bucket seat cannot be bolted to the car's original rails. It needs a base that holds it by the sides and rigidly attaches it to the floor. These bases perform that function and screw into the factory passenger seat mounting points.\u003c\/p\u003e\n\u003cp\u003eTheir shape is designed to keep the seat centered in its compartment. This keeps the passenger sitting in line with the car's axis, the harnesses pull straight, and the seat does not end up displaced toward the door or the tunnel.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eThe bases are made of 3 mm thick steel sheet, press-folded using a CNC press so that all pieces have exactly the same shape. They also feature a stamped rib, a recessed relief in the sheet that greatly increases its rigidity without adding weight. Thanks to it, the base does not bend even when subjected to heavy loads during braking or an impact.\u003c\/p\u003e\n\u003cp\u003eIt is a simple and very robust design, with few weak points. They come with the mounting holes already drilled and finished with black powder coating, resistant to corrosion and abrasion.\u003c\/p\u003e\n\n\u003ch3\u003eRegulations\u003c\/h3\u003e\n\u003cp\u003eThe bases are manufactured following the requirements of FIA Annex J for competition seat mountings.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36, passenger side\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, passenger side\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eFor bucket seats with a width of 400 to 440 mm between the lateral mounting points. Before buying, measure your seat from one lateral mounting point to the other to check that it is within that measurement. We have specific bases for the driver's side.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cp\u003eTwo side brackets, the complete set for one seat. Seat and mounting hardware not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771096863054,"sku":"DGSW.DE.77","price":61.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_7abcc1e6-4649-4420-b10c-50be4dc76f05.jpg?v=1793105106"},{"product_id":"bases-asiento-baquet-semibaquet-para-bmw-e36-e46","title":"Mounting bracket for BMW E36 and E46 bucket seat","description":"\u003cp\u003eSteel platform that is installed on the floor of the BMW E36 and E46 and serves as a base for mounting a bucket seat. The seat's side bases are bolted onto it, and thanks to its large number of holes, the seat can be positioned exactly where each driver needs it, both forward and backward and to the sides.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is it for\u003c\/h3\u003e\n\u003cp\u003eWhen mounting a bucket seat directly to the factory mounting points, the seat's position is limited by those four points. In the E36 and E46, this is a known issue because the driver's seat is not perfectly aligned with the steering wheel. The driver ends up driving slightly turned, which is very noticeable during long sessions and quick maneuvers.\u003c\/p\u003e\n\u003cp\u003eThe platform is fixed to the floor and provides a surface with many mounting holes. The seat bases can be bolted in different positions, so it is possible to move the bucket seat a few centimeters toward the center of the car until it is aligned with the steering column. It can also be moved forward or backward to adjust it to each driver's height and distance from the pedals.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with our side bases\u003c\/h3\u003e\n\u003cp\u003eThe platform is designed to work with our side bases for E36 and E46 bucket seats, both for the driver and passenger. The bases are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm S355 structural steel sheet. It is laser-cut, ensuring that all holes are in their exact position, and press-folded using a CNC press to give it the rigidity required to support the seat. The finish is black powder coating, which protects the steel from moisture and friction with the floor.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36\u003c\/li\u003e\n\n\u003cli\u003eBMW E46\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt is also suitable for semi-bucket seats with side mounts, installed with our bases.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cp\u003eOnly the platform is sold. Side bases, seat, and hardware not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771100762446,"sku":"DGSW3646.130","price":74.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-0130-adaptador-soporte-asiento-regulable-e8x-e9x-vista-1.jpg?v=1793173608"},{"product_id":"copelas-regulables-v1-para-e46-e39-e31-e60","title":"V1 adjustable aluminum camber plates for BMW E46, E39 and E31","description":"\u003cp\u003eV1 adjustable top mounts, also known as camber plates, for the front suspension of the BMW E46, E39 and E31. The kit includes two top mounts, which replace the factory ones and allow you to adjust the front wheel camber. They are a very popular upgrade for E46 drift and track cars, and a practical solution for stance cars that need to fit wide wheels.\u003c\/p\u003e\n\n\u003ch3\u003eCamber and its effect on grip\u003c\/h3\u003e\n\u003cp\u003eCamber is the angle of the wheel relative to the vertical when viewed from the front. A tire only provides its full grip when its entire tread is in contact with the asphalt. In a corner, the weight shifts to the outside wheel and the body leans, causing that wheel to tend to ride on its edge. A little negative camber compensates for this effect, allowing the tire to work flat when it receives the most load.\u003c\/p\u003e\n\u003cp\u003eA lowered E46 or E39, or one fitted with high-grip tires, usually requires more camber than the factory car allows. These top mounts provide that extra range. In a stance build, they are also useful for tilting the wheel just enough to fit under the fender.\u003c\/p\u003e\n\n\u003ch3\u003eHow they are made\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCNC-machined plate made from 15 mm PA6 aluminum, anodized in black.\u003c\/li\u003e\n\n\u003cli\u003eCNC-machined bearing housing made from high-quality carbon structural steel, with zinc plating.\u003c\/li\u003e\n\n\u003cli\u003eMaintenance-free, low-play PTFE-coated stainless steel spherical ball joint, designed for high loads.\u003c\/li\u003e\n\n\u003cli\u003eZinc-plated M8 fine-thread screws.\u003c\/li\u003e\n\n\u003cli\u003eNyloc nuts and lock washers to prevent loosening.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe metal ball joint replaces the original rubber mount. The shock absorber remains firmly secured, and the steering responds more precisely. These top mounts have been tested in drift and rally, under much higher loads than those of a road car.\u003c\/p\u003e\n\n\u003ch3\u003eChoose the version you need\u003c\/h3\u003e\n\u003cp\u003eThe V1 features an aluminum plate, the lightest option. The V2 adjusts camber in the same way but with a zinc-plated steel plate, and is more affordable. If you also want to adjust toe to improve steering return in drifting, the 3D top mounts allow this and are available in V1 and V2.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are installed on the front shock absorbers, replacing the factory top mounts. We recommend using threadlocker on the screws. After adjustment, a full alignment is essential.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series E39\u003c\/li\u003e\n\n\u003cli\u003eBMW 8 Series E31\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe price is for the pair, left and right.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771103875406,"sku":"DGSW46.14","price":139.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/copelas-regulables-v1-para-e46-e39-e31-e60-3.jpg?v=1793348455"},{"product_id":"copelas-traseras-para-e30-e36-e46-z3-z4","title":"Reinforced rear shock tower braces for BMW E30, E36, E46, Z3 and Z4 (pair)","description":"\u003cp\u003ePair of reinforced rear shock towers for the BMW E30, E36, E46, Z3 and Z4 shock absorbers. They replace the standard rubber top mounts, which over the years crack, flatten and start making noise. They are designed for drift, rallycross and circuit cars, stance projects and powerful road cars in which the original parts wear out quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the rear shock tower does\u003c\/h3\u003e\n\u003cp\u003eThe shock tower is the point where the top of the rear shock absorber attaches to the bodywork. This is where all the impacts that the shock absorber does not absorb are transmitted. The original shock tower has a rubber mount that filters these vibrations, but over time and with heat, it cracks or flattens. When this happens, the shock absorber has play in its mounting. Sharp knocks appear when driving over bumps, the rear becomes imprecise and, in extreme cases, the rubber can break.\u003c\/p\u003e\n\n\u003ch3\u003eMore resistant than standard\u003c\/h3\u003e\n\u003cp\u003eThe body and housing of these shock towers are made of 8 mm S355 steel, a high-strength structural steel that does not deform under the loads of a competition car. The bushings and nuts are galvanized to protect them from corrosion.\u003c\/p\u003e\n\u003cp\u003eInstead of conventional rubber, they feature military-grade rubber, the same type used in tanks and armored vehicles, chosen after extensive testing. Its 80 Shore A hardness holds the shock absorber firmly while filtering out some of the vibrations, so the car gains precision without becoming uncomfortable. Compared to polyurethane, it handles heat better and wears down less, so it maintains its properties for much longer.\u003c\/p\u003e\n\u003cp\u003eThese shock towers have been tested in drifting and rallying, under loads far greater than those of normal use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E30\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E36\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z3\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are installed in place of the original rear shock towers, using the same bodywork mounting points. If the car's standard shock towers are already cracked, it is advisable to also check the surrounding sheet metal. We have rear shock tower braces for that area.\u003c\/p\u003e\n\n\u003cp\u003eThe price is for the pair, left and right.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771105677646,"sku":"DGSW.48","price":57.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-048-soportes-amortiguadores-traseros-vista-1.jpg?v=1793173649"},{"product_id":"copelas-regulables-v2-para-e46-e39-e31-e60","title":"Adjustable V2 steel camber plates for BMW E46, E39 and E31","description":"\u003cp\u003eV2 adjustable top mounts, or camber plates, for the front axle of the BMW E46, E39 and E31. The set includes two top mounts, which replace the standard shock absorber top mounts and allow you to adjust the front wheel camber. The V2 is made from steel plate and is the best-value version in our range, designed for drift, rally sprint, track or stance cars.\u003c\/p\u003e\n\n\u003ch3\u003eWhy camber matters\u003c\/h3\u003e\n\u003cp\u003eCamber indicates how much the wheel tilts inwards or outwards when viewed from the front. Its effect is most noticeable in corners. When cornering, the car leans and the outside wheel supports most of the weight. If it is completely upright, it ends up driving on the edge of the tyre and loses grip. With some negative camber, that wheel remains flat under full load and uses the entire tyre contact patch.\u003c\/p\u003e\n\u003cp\u003eLowered E46s and E39s, or those fitted with grippier tyres, often need more camber than the standard car allows. These top mounts allow you to adjust to the desired value, whether for driving with correct alignment settings or for a specific drift or track setup. On a stance car, they also help tuck the wheels under the wheel arch.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing details\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e8 mm S355 structural steel plate, CNC cut and protected with gold zinc plating.\u003c\/li\u003e\n\n\u003cli\u003eHigh-quality carbon steel bearing housing, CNC machined, TIG welded and zinc plated.\u003c\/li\u003e\n\n\u003cli\u003eHigh-quality stainless steel bearing, maintenance-free and designed for high loads.\u003c\/li\u003e\n\n\u003cli\u003eTwo bushings included, M12 and M14, to choose from depending on the shock absorber or coilover shaft.\u003c\/li\u003e\n\n\u003cli\u003eZinc-plated M8 fine-thread screws and nuts with lock washers to prevent loosening.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe bearing replaces the original rubber mount, so the shock absorber does not move at its mounting point and the steering becomes more precise.\u003c\/p\u003e\n\n\u003ch3\u003eMore options\u003c\/h3\u003e\n\u003cp\u003eIf you want the lightweight version, the V1 has a 15 mm anodised aluminium plate. If you need to adjust the caster in addition to the camber, which determines how the steering wheel returns after countersteering, we also offer 3D top mounts in V1 and V2.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are fitted in place of the standard top mounts, on top of the front shock absorbers, with the appropriate bushing. Apply thread locker to the screws and carry out a full alignment when finished.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series E39\u003c\/li\u003e\n\n\u003cli\u003eBMW 8 Series E31\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe price is for the pair, left and right.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771107250510,"sku":"DGSW46.124","price":103.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-0124-copelas-regulables-v2-e30-e34-e32-e24-e28-vista-1.jpg?v=1793173546"},{"product_id":"copelas-regulables-3dv1-para-e46-e39-e31-e60","title":"V1 3D adjustable aluminum camber plates for BMW E46, E39 and E31","description":"\u003cp\u003eSet of two 3D adjustable V1 top mounts, or camber plates, for the front suspension of the BMW E46, E39 and E31. They are mounted in place of the original shock absorber top mount and allow you to freely adjust the front wheel camber and caster. This V1 version features a milled and anodized aluminum plate, the lightest in our range. It is an almost mandatory upgrade on a drift E46 or E39, and is also widely used on stance cars and track builds.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is camber adjustment used for\u003c\/h3\u003e\n\u003cp\u003eViewed from the front, the wheel can be straight or tilted. That tilt is the camber. A stock E46 has very little room to modify it, and when lowered or fitted with high-grip tires, it often falls short. With a little more negative camber, the outer wheel supports its entire tread in a corner and the car gains front grip. On stance cars, camber allows you to fit wide or low-offset wheels under the fender.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is caster adjustment used for\u003c\/h3\u003e\n\u003cp\u003eCaster is the tilt of the steering axis viewed from the side. With more caster, the steering wheel returns to the center with more force and the outer wheel gains camber the more it is turned. In drifting, this is immediately noticeable. Countersteering happens on its own and progressively, and the car is controlled with less effort in transitions. These top mounts allow you to find the caster setting that best suits each driver and each setup.\u003c\/p\u003e\n\u003cp\u003eAs the adjustment is 3D, the mounting point moves in several directions and each dimension is adjusted without affecting the other.\u003c\/p\u003e\n\n\u003ch3\u003eHow they are made\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCNC milled plate made from 15 mm PA6 aluminum and anodized in black.\u003c\/li\u003e\n\n\u003cli\u003eHigh-quality carbon steel structural bearing housing, CNC turned and galvanized.\u003c\/li\u003e\n\n\u003cli\u003eStainless steel ball joint with PTFE coating, low play, maintenance-free and suitable for high loads.\u003c\/li\u003e\n\n\u003cli\u003eZinc-plated M8 fine thread screws.\u003c\/li\u003e\n\n\u003cli\u003eNyloc nuts and Schnorr washers that prevent them from loosening.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eBy replacing the rubber mount with a metal ball joint, the shock absorber stops moving at its mounting point and the steering becomes more direct and precise.\u003c\/p\u003e\n\n\u003ch3\u003eV1 versus V2\u003c\/h3\u003e\n\u003cp\u003eThese 3D top mounts are manufactured in two versions with the same adjustment. The V1 has the 15 mm aluminum plate anodized in black, which weighs less and has a better finish. The V2 uses an 8 mm steel plate with gold galvanizing and costs less.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey go in place of the original top mounts, on top of the front shock absorbers. The screws that thread into the top mount must have thread locker. Once mounted and adjusted, the front axle must be aligned.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series E39\u003c\/li\u003e\n\n\u003cli\u003eBMW 8 Series E31\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe price corresponds to the pair, left side and right side.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771109282126,"sku":"DGSW46.143","price":156.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_e7da5e93-d88c-4800-9bba-ced302a1e3bc.jpg?v=1793110801"},{"product_id":"freno-de-mano-hidraulico-para-bmw-e46-desmontable","title":"BMW E46 hydraulic handbrake as a replacement for the original, with removable extension","description":"\u003cp\u003eHydraulic handbrake for the BMW E46, designed to replace the original handbrake in the center tunnel. It completely replaces the factory handbrake and is fixed using the original mounting points, so the interior retains a look very close to stock. It includes a removable extension that makes the lever vertical. Designed for drift, rally, and rallycross cars.\u003c\/p\u003e\n\n\u003ch3\u003eHow it differs from the factory handbrake\u003c\/h3\u003e\n\u003cp\u003eThe original E46 handbrake operates with cables and small drums inside the rear discs. It works well for parking, but it cannot lock the rear wheels while the car is moving. This hydraulic handbrake acts directly on the rear calipers using its own pump and locks the wheels with a short pull. This is what allows you to initiate and correct a drift, or close the car in a rally hairpin.\u003c\/p\u003e\n\u003cp\u003eTo install it, the original handbrake must be removed. The base has the mounting holes and fits into the factory tunnel mounting points without drilling.\u003c\/p\u003e\n\n\u003ch3\u003eMore leverage with the extension\u003c\/h3\u003e\n\u003cp\u003eBecause it sits in the original handbrake position, the lever is short and requires a bit more force than a vertical, long-lever handbrake. The included extension solves this. It is quick to install and makes the lever vertical and longer, making it much easier to lock the wheels. When not in use, it can be removed, leaving the center console clear.\u003c\/p\u003e\n\n\u003ch3\u003eRecommended installation\u003c\/h3\u003e\n\u003cp\u003eWe recommend installing it as an independent circuit, with additional calipers on the rear axle. This way, the service brake remains as it came from the factory and each system operates separately. In our shop, you will find the E46 additional caliper brackets, which make this installation much easier.\u003c\/p\u003e\n\u003cp\u003eTo connect the pump, you need 3\/8\" UNF and 7\/16\" UNF brake line fittings, which are not included. They are inexpensive, but they are not always available in general spare parts stores, so it is advisable to have them before you start.\u003c\/p\u003e\n\n\u003ch3\u003eImportant before buying\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eIt does not have a ratchet. The lever does not lock when raised, so it cannot be used as a parking brake.\u003c\/li\u003e\n\n\u003cli\u003eDepending on the equipment version, it may be necessary to trim the interior tunnel plastics slightly. The cut is hidden and cannot be seen from the outside.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\u003cp\u003e3\/8\" and 7\/16\" UNF fittings, brake lines, additional calipers, and brackets not included. We recommend that installation and bleeding be carried out by a specialized workshop. Product intended for track and competition use.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771112722766,"sku":"DGSW.116","price":111.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-0116-e46-atornillable-freno-mano-hidraulico-oculto-vista-1.jpg?v=1793173546"},{"product_id":"adaptador-doble-pinza-e36","title":"Screw-in adapters for BMW E36 and E46 hydraulic parking brake auxiliary caliper (pair) (NO 330)","description":"\u003cp\u003ePair of adapters to mount a second caliper on each rear wheel of the BMW E36 and E46 with rear disc brakes. This additional caliper connects to a hydraulic handbrake with its own circuit, so the original braking system is not affected. They screw onto the rear bracket without welding, so the installation is reversible.\u003c\/p\u003e\n\n\u003ch3\u003eWhy a separate caliper for the handbrake\u003c\/h3\u003e\n\u003cp\u003eIn drifting and rallying, the hydraulic handbrake is used to lock the rear wheels while moving, initiate a drift, or close a slow corner. If it is integrated into the stock circuit, the pedal and lever share fluid and lines, and any failure or air in one part affects the other.\u003c\/p\u003e\n\u003cp\u003eWith an independent caliper on each wheel, each system works on its own. The pedal brakes exactly as before and the lever acts only on its own calipers, with a direct and consistent feel. Furthermore, if you ever want to return the car to stock, you just need to remove the adapters.\u003c\/p\u003e\n\n\u003ch3\u003eWhich additional caliper should be installed\u003c\/h3\u003e\n\u003cp\u003eThe rule is simple. The additional caliper must be from the same brake version that the car already has at the rear. If your car has a solid rear disc, like an E46 318i, the second caliper must also be from a version with a solid disc. If it has a ventilated disc, the caliper must match that disc. This way, the pad is aligned with the disc surface and brakes as it should.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe adapters are fixed to the rear bracket with the screws included in the kit, applying thread locker so they do not loosen with vibrations. No welding is required.\u003c\/p\u003e\n\u003cp\u003eTo make room for the second caliper, the ABS sensor from the rear wheel must be removed. When it is removed, the ABS stops working, which is why this setup is designed for competition cars.\u003c\/p\u003e\n\u003cp\u003eDepending on the bracket version, it may be necessary to slightly reduce the bracket or the adapter with a file or grinder so that they fit properly. In cars with a ventilated rear disc, the pad of the additional caliper may not cover one hundred percent of the disc surface. This does not reduce its effectiveness in locking the wheel.\u003c\/p\u003e\n\u003cp\u003eWe recommend that the installation of the hydraulic circuit and the bleeding be done by a specialized workshop.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36 sedan, coupe, convertible, and Touring with rear disc brakes\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, all versions except the M3 E46 and the 3.0 (330i, 330d, and 330xi)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eNot valid for the E36 Compact. For that model and for the E30, we have specific drum-to-disc adapters with dual calipers. The M3 E46 and the E46 3.0 have larger brakes and have their own adapter.\u003c\/p\u003e\n\u003cp\u003eIf you have doubts about whether the adapter fits your car or with the calipers you want to install, call or write to us before placing the order and we will help you check it.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e2 adapters, left side and right side\u003c\/li\u003e\n\n\u003cli\u003eHardware necessary for installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eCalipers, lines, and hydraulic handbrake not included. Product intended for track and competition use.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771117867342,"sku":"DGSW.94","price":95.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_e9c6ad64-49f8-4ea0-922a-ab92cb4125ca.jpg?v=1793103687"},{"product_id":"adaptador-doble-pinza-e46-3-0","title":"Screw-in adapters for additional hydraulic parking brake caliper BMW E46 3.0 (pair)","description":"\u003cp\u003ePair of adapters to mount an additional caliper on each rear wheel of the BMW E46 with the 3.0 engine. These versions feature a larger rear brake than the rest of the range, with a 320 mm disc, so they require their own adapter. The additional caliper connects to an independent hydraulic handbrake, without affecting the original brake circuit.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages of an independent circuit\u003c\/h3\u003e\n\u003cp\u003eThe hydraulic handbrake is essential in drifting and rallying to lock the rear wheels while moving. With its own pair of calipers, the lever does not share fluid or lines with the pedal. The service brake works exactly as it does from the factory, and the handbrake responds powerfully and consistently with every pull, without one system affecting the other.\u003c\/p\u003e\n\u003cp\u003eOn a 3.0 E46, there is an additional advantage. The 320 mm rear disc offers a lot of surface area, and the additional caliper locks the wheel easily, even at high speeds.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe adapters screw onto the rear bracket using the included hardware, applying thread locker to prevent them from loosening due to vibrations. They do not require welding, so the car can be returned to its original state by removing them.\u003c\/p\u003e\n\u003cp\u003eTo fit the second caliper, it is necessary to remove the ABS sensor from each rear wheel. Without that sensor, the ABS will stop working, which is why this setup is designed for competition cars.\u003c\/p\u003e\n\u003cp\u003eThe additional caliper must be the one from the same 3.0 version to match the 320 mm disc. We recommend that the circuit installation and bleeding be carried out by a specialized workshop.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 with a 3.0 engine and 320 mm rear brake, such as the 330i and 330d.\u003c\/p\u003e\n\u003cp\u003eWe have specific adapters for the rest of the E46 engines and for the E36. Not suitable for the M3 E46.\u003c\/p\u003e\n\u003cp\u003eIf you have any doubts about whether the adapter fits your car or the calipers you want to install, call or write to us before placing the order.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e2 adapters, left side and right side\u003c\/li\u003e\n\n\u003cli\u003eHardware required for installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eCalipers, hoses, and hydraulic handbrake not included. Product intended for track and competition use.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771118326094,"sku":"DGSW.95","price":95.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_e9c6ad64-49f8-4ea0-922a-ab92cb4125ca.jpg?v=1793103687"},{"product_id":"jack-point-e46","title":"Two-piece removable rear jack point BMW E46 (coupe, sedan, Compact, convertible and Touring)","description":"\u003cp\u003eRear jack point for the BMW E46 in all body styles: coupé, sedan, Compact, convertible, and Touring. It is installed under the rear axle and provides a central point to support the jack, lifting the entire rear of the car at once. It is very useful for drift cars and any lowered E46.\u003c\/p\u003e\n\n\u003ch3\u003eLifting the car without hassle\u003c\/h3\u003e\n\u003cp\u003eAn E46 with lowered suspension leaves very little room for the jack. The side lifting points are almost flush with the ground, and using them only lifts one wheel at a time. In the paddock, with several sessions ahead and rear tires that wear out quickly, that is wasted time and a risk to skirts and underbody parts.\u003c\/p\u003e\n\u003cp\u003eThe jack point solves the problem with a central support accessible from behind. The jack fits easily, the car lifts from the rear all at once, and both wheels are free. Changing tires, checking the brakes, or working on the differential is much faster.\u003c\/p\u003e\n\n\u003ch3\u003eTwo-piece design\u003c\/h3\u003e\n\u003cp\u003eIt consists of two pieces. The one anchored under the axle remains fixed and is barely visible. The one that protrudes to receive the jack can be removed when not in use, so as not to lose ground clearance or change the appearance of the car on a daily basis. It is installed in no time before the day's events or when work needs to be done on the car.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and manufacturing\u003c\/h3\u003e\n\u003cp\u003eIt is fixed under the original rear axle. The only extra work is a small cutout in the center of the lower rear bumper to make the support accessible. The jack point is made of CNC press-folded steel and welded by welders with many years of experience, so that it can support the weight of the car without any problems.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 coupé, sedan, Compact, convertible, and Touring.\u003c\/p\u003e\n\u003cp\u003eRemember that the jack point is for lifting the car. To work underneath, always support it on jack stands.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771123568974,"sku":"DGSW.104","price":86.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-0104-bmw-e46-punto-elevacion-vista-1.jpg?v=1793173606"},{"product_id":"spliter-frontal-e46-pack-m-v1","title":"BMW E46 aluminum front splitter for M bumpers","description":"\u003cp\u003eAluminum front splitter for the BMW E46 with the M package front bumper. It mounts to the bottom of the bumper and adds a flat lip that protrudes forward, like on race cars. The E46 gains a more aggressive look and appears lower. It is a custom design, made to fit the E46 M bumper.\u003c\/p\u003e\n\n\u003ch3\u003eThe finishing touch for a drift or track E46\u003c\/h3\u003e\n\u003cp\u003eThe M bumper is one of the most common aesthetic upgrades for the E46, and the splitter is the next step. It finishes the front end with a low, straight line, emphasizes the race car character, and adds a distinctive detail, as it is not a factory part or a design that can be found everywhere.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, which is lightweight, rustproof, and resistant to scuffs. The finish is black powder coating, oven-dried, which protects the aluminum and matches any body color. On a lowered E46, the splitter also protects the lower edge of the bumper. If it gets damaged, it is much cheaper to replace than the bumper.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 with M package front bumper.\u003c\/p\u003e\n\u003cp\u003eIt is not compatible with the stock front bumper. In the photos you can see the splitter before installation and fitted to various bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771128680782,"sku":"DGSW.34","price":114.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/034.jpg?v=1793285545"},{"product_id":"difusor-trasero-universal","title":"Universal adjustable aluminum rear diffuser (BMW 1, 2, 3 and 5 Series and other brands)","description":"\u003cp\u003eUniversal aluminum rear diffuser to be mounted under the rear bumper. It gives the car a racing look, makes it appear lower, and adds an unusual piece that sets it apart from the rest. It is designed for a good number of BMW 1, 2, 3 and 5 Series, but can also be adapted to bumpers from many other brands. It is an original design.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is it universal?\u003c\/h3\u003e\n\u003cp\u003eThe part of the diffuser that attaches to the bumper is completely flat. Thanks to this, it can be supported on the underside of very different bumpers, without depending on the shape of a specific model. With a little ingenuity, it fits almost any car, although it is advisable to position it before fixing it to check that it fits the shape of the bumper and the exhaust.\u003c\/p\u003e\n\n\u003ch3\u003eConfigurable to your liking\u003c\/h3\u003e\n\u003cp\u003eThe diffuser consists of several pieces, and each one is placed however you prefer:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eIn the center, it accommodates 2 or 3 fins, placed with the spacing you choose.\u003c\/li\u003e\n\n\u003cli\u003eThe two fins at the ends are independent pieces and can also be placed wherever they look best.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThis allows it to be adapted to the width of the bumper, the position of the exhaust outlets, and the style of the car. Each installed diffuser ends up being different. In the photos you will see the diffuser before assembly and fitted on several example bumpers.\u003c\/p\u003e\n\n\u003ch3\u003eMeasurements\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWidth of the main piece mounting surface: 81 cm\u003c\/li\u003e\n\n\u003cli\u003eDepth of the main piece mounting surface: 12 cm\u003c\/li\u003e\n\n\u003cli\u003eMounting surface of each side fin: 15 cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made of 3 mm aluminum sheet, lightweight, stainless, and resistant to the scuffs that the lower part of the bumper suffers in lowered cars.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series: E82 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 2 Series: F22, F23 and M2 F87\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series: E36, E36 Compact, E46, E90, E92, E93, F30, F31, F32, F33, F34, M3 F80 and M4 F82\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series: E39\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt can also be adapted to bumpers from other brands with a lower area where the flat mounting surface can be supported. It requires adjustment during installation.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771131367758,"sku":"DGSW.39","price":136.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-039-universal-difusor-trasero-vista-1.jpg?v=1793173650"},{"product_id":"deposito-de-gasolina-en-aluminio-38l","title":"38-liter aluminum racing fuel tank (BMW and Nissan)","description":"\u003cp\u003eAluminum fuel tank with an approximate capacity of 38 liters, designed for race cars. It replaces the original tank and is normally mounted in the trunk, away from the underside of the car. It is a very common solution in drift, rally, rally sprint, time attack, and quarter-mile drag cars.\u003c\/p\u003e\n\n\u003ch3\u003eWhy replace the original tank\u003c\/h3\u003e\n\u003cp\u003eThe stock tank is located under the bodywork, where it can take hits during a rally stage or rub against the ground in a very lowered drift car. It is also usually large and heavy, and its shape is not designed to properly feed the engine when the car is sideways or braking hard. An aluminum tank in the trunk is better protected, weighs less, and allows for the installation of a fuel system designed for racing.\u003c\/p\u003e\n\u003cp\u003eWith 38 liters, there is enough fuel for a circuit session, a drift run, or a stage without loading the car with more weight than necessary.\u003c\/p\u003e\n\n\u003ch3\u003eConstant feed with the swirl pot\u003c\/h3\u003e\n\u003cp\u003eCombined with our swirl pot and external fuel pumps, this tank forms a system that maintains fuel flow even under the greatest lateral and braking forces. The low-pressure pump carries the fuel from the tank to the swirl pot, and the high-pressure pump feeds the engine from there. This way, the engine never runs out of fuel, neither in the middle of a drift nor when the tank is almost empty.\u003c\/p\u003e\n\u003cp\u003eIf you have any doubts about how to connect it, we can send you a diagram with the correct connections.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCapacity: approximately 38 liters\u003c\/li\u003e\n\n\u003cli\u003eMaterial: aluminum\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 42 x 42 x 22 cm\u003c\/li\u003e\n\n\u003cli\u003eConnection fittings: 8 mm\u003c\/li\u003e\n\n\u003cli\u003eMounting holes in the base: 10 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eAll joints are TIG welded so that the tank is watertight and withstands competition vibrations. It has been tested in drift and rally, with strong lateral loads and constant impacts.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part that can be mounted in any car with space in the trunk. These are some of the most common models:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series: E82 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 2 Series: F22, F23, and M2 F87\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series: E21, E30, E36, E36 Compact, E46, E90, E92, E93, F30, F31, F32, F33, F34, M3 F80, and M4 F82\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series: E28, E34, E39, E60, E61, F10, and F11\u003c\/li\u003e\n\n\u003cli\u003eBMW 6 Series: E24 and E63\u003c\/li\u003e\n\n\u003cli\u003eBMW 7 Series: E32, E38, E65, and E66\u003c\/li\u003e\n\n\u003cli\u003eBMW 8 Series: E31\u003c\/li\u003e\n\n\u003cli\u003eNissan: S13, S14, and S15\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003ePumps, swirl pot, hoses, additional fittings, filler cap, and brackets not included. The tank must be properly secured and separated from the cabin according to the regulations of the competition you are participating in. We recommend that the installation be carried out by a specialized workshop. Product intended for track and competition use.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771133268302,"sku":"DGSW.42","price":139.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/deposito-de-gasolina-en-aluminio-38l-3.jpg?v=1793348456"},{"product_id":"refuerzos-brazos-de-suspension-traseros-bmw-e46","title":"BMW E46 Rear Longitudinal Arm Mount Reinforcement and Repair Kit (for welding)","description":"\u003cp\u003eReinforcement plate kit for mounting the rear longitudinal arm to the BMW E46 bodywork. It is suitable for repairing a damaged mount and reinforcing it before problems arise. It is welded to the bodywork, and it is recommended to install it during the car's preparation or when working on the rear suspension.\u003c\/p\u003e\n\n\u003ch3\u003eWhy this mount gets damaged\u003c\/h3\u003e\n\u003cp\u003eThe longitudinal arm holds the rear wheel and is mounted to the bodywork in a sheet metal housing located in front of the axle. This is where the forces from acceleration, braking, and wheel load are transmitted. In the E46, the sheet metal in this area tends to crack over time, and this process is greatly accelerated in cars used for drifting, those with more power, or those fitted with stiff suspension.\u003c\/p\u003e\n\u003cp\u003eIf the mount gives way, the arm shifts position and the rear wheel loses its alignment. The car becomes unstable, the tires wear unevenly, and, in the most serious cases, the arm can detach from the bodywork.\u003c\/p\u003e\n\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe plates are welded over the original housing, adding strong material exactly where the most load is received. The force from the arm is distributed over a larger surface area, and the factory sheet metal is no longer stressed to its limit. On a cracked mount, the kit restores its strength once repaired.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe parts are made from 3 mm S355 structural steel, laser-cut and CNC press-bent to fit the shape of the mount.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe rear arm must be removed, the area thoroughly cleaned down to bare metal, and the plates welded in. We recommend that this be done by a workshop with experience in bodywork welding, and that the area is then protected with primer and paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\u003cp\u003eFor competition cars or mounts with significant damage, we offer the PRO V2 version, which covers a larger area.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771135988046,"sku":"DGSW.57","price":23.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-057-e46-refuerzo-soporte-brazo-trasero-vista-2.jpg?v=1793173649"},{"product_id":"tacos-de-motor-reforzados-poliuretano-e36-e46-y-e30-z3-z4-con-4-cil","title":"Reinforced engine mounts BMW E36, E46, Z3 and Z4 (set)","description":"\u003cp\u003eReinforced engine mount kit for the BMW E36, E46, Z3 and Z4. They are designed to withstand the loads of high-powered sports cars, where the stock mounts deteriorate quickly. Their materials give them a much longer service life than the originals.\u003c\/p\u003e\n\n\u003ch3\u003eThe engine, firm in its place\u003c\/h3\u003e\n\u003cp\u003eThe engine mounts on these BMWs are made of soft rubber and, over the years and miles, they crack and flatten. In drift cars, track cars, or cars with tuned engines, wear and tear happens much sooner. The engine starts to move excessively, the gear shift becomes imprecise, transmission shocks appear when accelerating and decelerating, and the car takes longer to respond to the throttle.\u003c\/p\u003e\n\u003cp\u003eWith firmer mounts, the engine stays in position even under high torque. Power reaches the wheels more directly, the transmission suffers less, and the car responds better during load changes.\u003c\/p\u003e\n\n\u003ch3\u003eMilitary-grade rubber\u003c\/h3\u003e\n\u003cp\u003eThese mounts feature a special military-grade rubber, the same used in tanks and armored vehicles, chosen after extensive testing. Its 80 Shore A hardness holds the engine firmly while filtering out some of the vibrations, so the car does not become uncomfortable. Compared to polyurethane, it withstands the heat of the engine bay better and wears out less.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe body and bracket are made of 4 mm S355 structural steel. The mount height is 70 mm. They have been tested in drift and rally.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E36\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z3\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eCombined with our steel engine support arms for M50 and M52, the assembly holds the engine much more firmly than the stock parts.\u003c\/p\u003e\n\n\u003cp\u003eThe price is for the complete kit.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771140018510,"sku":"DGSW.66","price":131.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-066-e36-polyurethane-soportes-motor-vista-2.jpg?v=1793173650"},{"product_id":"reposapies-ajustable-universal","title":"Universal aluminum passenger footrest, 28 x 37 cm","description":"\u003cp\u003eUniversal aluminum footrest for the co-driver, also called a footboard or footplate. It is a 28 x 37 cm plate with a non-slip textured surface that attaches to the car floor and gives the co-driver firm foot support. It is increasingly common in rally, rallycross, time attack, drift, and drag racing cars.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is it for?\u003c\/h3\u003e\n\u003cp\u003eIn a competition car, the co-driver sits in a bucket seat and is secured with a harness, but their feet remain on the car floor, which in many cases is stripped of carpeting and is uneven. During hard braking or a jump, the co-driver tends to slide forward and push with their legs to stay in place.\u003c\/p\u003e\n\u003cp\u003eWith the footrest, they have a flat, stable support at the right height. They can push with their feet and stay securely positioned in the seat, which provides greater safety and comfort. In rallying, this is especially important because the co-driver needs to read the pace notes without moving around in every corner.\u003c\/p\u003e\n\n\u003ch3\u003eNon-slip textured surface\u003c\/h3\u003e\n\u003cp\u003eThe plate features a textured surface. On one hand, it increases the rigidity of the aluminum, so the plate does not bend under the foot. On the other, the texture creates a non-slip surface, so the shoe does not slip even when wet or dusty.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing and installation\u003c\/h3\u003e\n\u003cp\u003eIt is made of 3 mm aluminum cut using a CNC punching machine, making it lightweight and strong. It comes with pre-drilled mounting holes, so it can be quickly installed with screws or rivets.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eUniversal. These are some of the most common models it is fitted to:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series: E82 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 2 Series: F22, F23, and M2 F87\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series: E30, E36, E36 Compact, E46, E90, E92, E93, F30, F31, F32, F33, F34, M3 F80, and M4 F82\u003c\/li\u003e\n\n\u003cli\u003eNissan: S13, S14, and S15\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eFor several BMW models, we also offer specific footrests with risers, adapted to the floor of each model.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771140608334,"sku":"DGSW.68","price":74.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote4-068-ajustable-rally-reposapies-vista-1.jpg?v=1793172751"},{"product_id":"refuerzos-cuna-delantera-bmw-e46","title":"BMW E46 Front Subframe Reinforcement and Repair Kit (for welding)","description":"\u003cp\u003eReinforcement kit for the BMW E46 front subframe, the structure that supports the engine and to which the suspension arms and steering rack are attached. The plates are welded onto the subframe to repair it if it is already damaged or to make it stronger before it gets damaged. It is recommended to install it with the subframe out of the car.\u003c\/p\u003e\n\n\u003ch3\u003eA heavily stressed part\u003c\/h3\u003e\n\u003cp\u003eAlmost all the forces from the front end pass through the front subframe. It supports the weight of the engine, absorbs the impacts from the wheels in every pothole, and withstands the force with which the arms pull and push when braking and cornering. In a drift or track E46, with high-grip tires and hard braking, those loads are much higher than on the street.\u003c\/p\u003e\n\u003cp\u003eOver time, the subframe sheet metal fatigues at the points where the stresses are concentrated, and cracks can appear. If this happens, the suspension mountings move, the front geometry changes under load, and the car loses precision and stability.\u003c\/p\u003e\n\n\u003ch3\u003eBetter with the subframe removed\u003c\/h3\u003e\n\u003cp\u003eDuring the preparation of a competition E46, the front subframe is usually removed from the car to perform a swap, change the engine mounts, or simply clean and paint it. It is the perfect time to weld the reinforcement. All areas are accessible, the welding is better, and the subframe goes back into place stronger than the original.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing and installation\u003c\/h3\u003e\n\u003cp\u003eThe plates are made of 3 mm S355 structural steel, laser-cut and bent in a CNC press to follow the shape of the subframe. They are welded onto the clean sheet metal down to the bare metal, repairing any cracks that may be present beforehand. We recommend that a professional welder does it and then protect the subframe with primer and paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771141034318,"sku":"DGSW.70","price":18.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_b3863882-7090-4f85-960b-1961c5084674.jpg?v=1793274872"},{"product_id":"refuerzos-copelas-traseras-bmw-e30-e36-e46-z3-z4","title":"Rear strut tower reinforcement plates for BMW E30, E36, E46, Z3 and Z4","description":"\u003cp\u003eReinforcement plates for the rear shock towers of the BMW E30, E36, E46, Z3 and Z4, the bodywork mounting point for the top of the rear shock absorber. They help prevent this area from cracking and can also be used to repair it once damaged. Depending on the condition of the bodywork, they can be bolted on like a washer or welded in place.\u003c\/p\u003e\n\n\u003ch3\u003eA common problem over time\u003c\/h3\u003e\n\u003cp\u003eAll these BMWs share a well-known issue. After many years and hundreds of thousands of kilometres, the rear shock tower sheet metal becomes fatigued and eventually cracks around the shock absorber mount. Every bump pushes the shock absorber against the bodywork, and thin, aged sheet metal eventually gives way. This process is greatly accelerated by coilovers, stiff springs, or use in drifting and circuit racing.\u003c\/p\u003e\n\u003cp\u003eA cracked rear shock tower starts by making noise and, if left unrepaired, can eventually result in the shock absorber punching through the boot floor. This is a much more expensive repair than prevention.\u003c\/p\u003e\n\n\u003ch3\u003eTwo ways to use them\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBolted on as prevention.\u003c\/strong\u003e If the shock tower is in good condition, the plate is placed under the shock absorber mount and acts as a large-surface washer. It distributes the load over a much larger area of sheet metal and helps prevent cracks from forming.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWelded on as a repair.\u003c\/strong\u003e If the shock tower is already badly worn or cracked, the plate is welded over it after the sheet metal has been repaired, restoring its strength.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe plates are made from 3 mm S355 structural steel, laser-cut so that the holes align with the original mounting points and CNC press-bent to sit securely on the shock tower.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E30\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E36\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z3\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIf you are also looking to replace the shock absorber mount, we offer reinforced rear shock tower mounts for these same models.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771141263694,"sku":"DGSW.75","price":10.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-075-e30-e36-e46-refuerzo-torretas-traseras-vista-2.jpg?v=1793173606"},{"product_id":"refuerzo-torretas-delanteras-bmw-e46-v1","title":"Front tower reinforcement plates for BMW E46","description":"\u003cp\u003eReinforcement plates for the front towers of the BMW E46, designed to be mounted under the original shock tower mount. Their function is to protect the sheet metal of the tower, which in cars with many years and kilometers ends up cracking due to fatigue.\u003c\/p\u003e\n\n\u003ch3\u003eWhy towers break\u003c\/h3\u003e\n\u003cp\u003eThe front shock rests on top of the tower, an area of the bodywork located on each side of the engine bay. All the force of the suspension enters the bodywork through that point, through the screws that secure the mount. Every pothole, every curb, and every hard cornering load punishes that small sheet metal surface.\u003c\/p\u003e\n\u003cp\u003eAn E46 with more than twenty years and hundreds of thousands of kilometers has accumulated millions of those cycles. The metal fatigues and cracks appear around the mount holes, which keep growing until the tower gives way. The risk increases greatly if the car is lowered, has coilovers with stiff springs, or is used on the track or for drifting.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the reinforcement does\u003c\/h3\u003e\n\u003cp\u003eThe plate is placed between the mount and the tower and works as a large-surface washer. Instead of concentrating on the edges of the holes, the load is distributed over a much larger area and the original sheet metal works under less tension. It is a preventive measure. Installed in time, it avoids a much more expensive sheet metal and welding repair. If the tower already has cracks, it must be repaired before installing the plates.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eThey are made with 3 mm S355 structural steel. Laser cutting ensures that the holes are exactly where the mount holes are, and CNC press bending gives the plate the shape of the tower so that it rests on its entire surface. The final zinc plating prevents corrosion, something important in an area of the engine bay where water and dirt accumulate.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 in all its body styles.\u003c\/p\u003e\n\u003cp\u003eIn our store you also have other chassis reinforcements for the E46, such as floor and suspension arm mount reinforcements.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe mount is loosened, the plate is placed underneath, and the screws are tightened again to the torque specified by the manufacturer. The most practical thing is to take advantage of a shock absorber change, mount changes, or the installation of coilovers to install them.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771144409422,"sku":"DGSW.111","price":37.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/refuerzo-torretas-delanteras-bmw-e46-v1-3.jpg?v=1793348462"},{"product_id":"refuerzo-torretas-delanteras-bmw-e46-v2","title":"Front tower side braces BMW E46 V2 (for welding)","description":"\u003cp\u003eV2 side braces for the front towers of the BMW E46. They are the most complete version of our tower braces for this model. They are welded between the tower and the fender area, joining both parts of the bodywork so that they work together. The front of the car gains a lot of rigidity and the tower is protected against fatigue cracks.\u003c\/p\u003e\n\n\u003ch3\u003eMore reinforcement area\u003c\/h3\u003e\n\u003cp\u003eIn a drift or track E46, the front towers receive very high loads on every bump and every suspension stroke. The sheet metal surrounding them flexes, the car loses steering precision and, over time, cracks appear. The V2 version covers more surface area than the MINI and connects the tower directly to the side structure, so that the stress is distributed over a much wider area.\u003c\/p\u003e\n\u003cp\u003eIt is the recommended option for competition cars, for cars with very firm suspension or a lot of grip, and for bodywork that already shows signs of fatigue in that area.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThey are made of 2 mm S355 structural steel, laser cut and bent in a CNC press. The bending gives each piece the necessary shape to follow the contour of the bodywork, and that makes welding much easier.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are welded from the fender side. Depending on the year of manufacture of the car, the part that rests on the fender may need to be bent slightly so that it fits well. It is a very quick adjustment that is done in a few seconds with a vise.\u003c\/p\u003e\n\u003cp\u003eWe recommend that the welding be done by a workshop with experience in sheet metal, with the area cleaned down to the metal, and then protected with primer and paint. They can be combined with a front tower bar to achieve maximum reinforcement in the front.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a more compact and easier to install option, we also have the MINI version.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771144999246,"sku":"DGSW.115","price":45.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/refuerzo-torretas-delanteras-bmw-e46-v2-3.jpg?v=1793348462"},{"product_id":"oil-cooler-diffuser","title":"Aluminum shroud for 7\" fan in 30-row oil cooler","description":"\u003cp\u003eAluminum shroud, also called a fan shroud or fan diffuser, for mounting a 7\" fan on a 30-row oil cooler. It directs the fan's airflow through the entire cooler, cooling the oil more effectively, while keeping the installation tidy and giving it a professional finish. It is a very common addition to drift and track cars with an auxiliary oil cooler.\u003c\/p\u003e\n\n\u003ch3\u003eWhy use a shroud\u003c\/h3\u003e\n\u003cp\u003eA fan bolted directly to a cooler only moves air through the circular area immediately in front of it. The corners of the cooler receive almost no airflow, and some of the air escapes out the sides without passing through the fins. The shroud closes the gap between the fan and the cooler. This ensures that all the air moved by the fan passes through the entire surface of the cooler, including the corners.\u003c\/p\u003e\n\u003cp\u003eIn drifting, the car spends a lot of time at low speeds with the engine at high revs, so very little air enters through the front just when the oil gets hottest. Under these conditions, the fan does the work, and the shroud makes it much more effective. Keeping the oil at a stable temperature protects the engine and prevents it from losing lubrication capacity during prolonged use.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eIt is made from 2 mm aluminum sheet, cut and bent on CNC machines to ensure a precise fit on the cooler. The finish is textured black powder coating, resistant to heat, dirt, and scuffs. It includes the screws for mounting the fan to the shroud.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor fans with a 200 mm diameter and 215 mm between mounting holes\u003c\/li\u003e\n\n\u003cli\u003eFor 30-row oil coolers measuring 260 x 235 x 50 mm (width x height x depth)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eBefore purchasing, check that your cooler and fan match these dimensions.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for any car fitted with an oil cooler of these dimensions. The models it is most commonly installed on are:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series: E82 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 2 Series: F22, F23, and M2 F87\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series: E30, E36, E36 Compact, and E46\u003c\/li\u003e\n\n\u003cli\u003eNissan: S13, S14, and S15\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eOil cooler and fan not included.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771145195854,"sku":"DGSW.119","price":37.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0119-carenado-electroventilador-con-ventilador-vista-trasera.jpg?v=1793265809"},{"product_id":"cubre-carter-para-bmw-e46-x-brace","title":"Domex 700 steel skid plate with X-brace lower bar for BMW E46","description":"\u003cp\u003eHigh-strength steel skid plate with an X-shaped lower reinforcement bar, also known as an X-brace, for the BMW E46. In a single piece, it protects the oil pan from impacts and adds rigidity to the lower front of the chassis. Suitable for all E46 engines and body styles.\u003c\/p\u003e\n\n\u003ch3\u003eCrankcase protection\u003c\/h3\u003e\n\u003cp\u003eThe oil pan is the lowest part of the engine and the most exposed. A strike against a rock, a curb, or the track itself when driving a lowered car can dent or break it. If it is dented, the pump may stop drawing oil, and if it breaks, the engine will empty in seconds. In either case, the engine is at serious risk.\u003c\/p\u003e\n\u003cp\u003eThe skid plate fits underneath and takes the impact instead of the oil pan. It is made from 3 mm Domex 700 steel, a high-strength steel with excellent abrasion resistance, so it withstands impacts and dragging over gravel or asphalt without deforming or wearing out quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the X-brace provides\u003c\/h3\u003e\n\u003cp\u003eThe X-brace is an X-shaped bar that connects the lower points of the front of the car. It works like strut tower bars, but at the bottom. When the car is cornering flat or braking hard, the front subframe and its mountings tend to move slightly relative to each other. The bar ties them together and makes the front end work as a more rigid assembly. Steering becomes more precise, and the car responds more directly during weight transfers.\u003c\/p\u003e\n\u003cp\u003eIt is made from 40 x 20 mm flat oval tubing with a 3 mm wall, the same we use for our strut tower bars. By integrating it into the skid plate, protection and reinforcement are achieved in a single piece.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe parts are made on CNC machines and joined using TIG welding, a precise method that leaves clean and strong welds.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 with any engine and in all its body styles: sedan, coupe, convertible, Touring, and Compact.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a strut tower bar for the top, we also have front and rear bars for the E46.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771145261390,"sku":"DGSW.120","price":131.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-0120-bmw-e46-protector-bajos-vista-1.jpg?v=1793173546"},{"product_id":"barra-para-sujecion-arnes-en-bmw-e46","title":"Adjustable harness bar for BMW E46 Coupé and Compact","description":"\u003cp\u003eHarness mounting bar, also known as a harness bar, for the BMW E46 coupé and Compact. It provides a firm mounting point for the shoulder straps of a racing harness at the correct height and angle, without having to install a roll cage. It attaches to the car's original mounting holes, and its adjustable straps allow it to be fitted to any seat and driver.\u003c\/p\u003e\n\n\u003ch3\u003eWhy a harness bar is necessary\u003c\/h3\u003e\n\u003cp\u003eThe shoulder straps of a harness must extend almost horizontally backwards from the occupant's shoulders. If they are anchored to the floor behind the seat or to the rear seat belt mounting points, they are angled steeply downwards. In a frontal impact, they pull the body downwards and compress the spine, which is exactly what the harness is designed to prevent.\u003c\/p\u003e\n\u003cp\u003eThe bar is positioned behind the front seats at shoulder height. The straps are wrapped around it and operate at the angle for which they are designed, with the geometry recommended by the FIA for harness installation. This holds the body against the seat and ensures the harness performs its safety function.\u003c\/p\u003e\n\n\u003ch3\u003eAdjustable straps with uniball\u003c\/h3\u003e\n\u003cp\u003eIn addition to the main bar, the assembly includes support straps that secure it backwards. They are adjustable in length and end in uniball ball joints, spherical metal joints that automatically orient themselves towards the mounting point. This allows the bar to be adjusted to the seat installed in the car and secured firmly, without any play or tension on the mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eStrap stops\u003c\/h3\u003e\n\u003cp\u003eThe bar features stops that prevent the shoulder straps from sliding along it. Each strap remains in position, separated by the correct distance from the neck, and does not bunch up with the other during hard braking or an impact.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe welding is MIG\/MAG and is carried out by a certified welder, with the parts secured in fixed jigs so that every bar is made to the same dimensions. The finish is textured black powder coating, resistant to rubbing and scratches, with a discreet appearance that matches any interior and bodywork colour.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt bolts into the car's original factory mounting holes, without drilling the bodywork. The only thing that needs to be done is to trim the plastic B-pillar trim slightly to allow the bar to pass through.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 coupé and BMW E46 Compact.\u003c\/p\u003e\n\n\u003cp\u003eHarnesses not included. Product intended for track and competition use. We recommend using it with racing seats prepared for harnesses.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771146604878,"sku":"DGSW.135","price":161.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-0135-bmw-e46-barra-arneses-vista-1.jpg?v=1793173545"},{"product_id":"refuerzo-torretas-delanteras-bmw-e46","title":"Front strut tower side braces for BMW E46 MINI version (for welding)","description":"\u003cp\u003eMINI version side braces for the front towers of the BMW E46. These are plates that are welded to the bodywork next to the towers, providing them with additional rigidity while reinforcing an area that suffers a lot in drift and circuit cars. It is the most compact and easiest to install version in our range of tower braces for the E46.\u003c\/p\u003e\n\n\u003ch3\u003eWhy reinforce the towers\u003c\/h3\u003e\n\u003cp\u003eThe front towers receive all the weight of the front end and every impact coming from the wheels. In a corner, the tower on the outside loads much more than the other, and the surrounding sheet metal tends to flex. Over the years and with intensive use, that flexing fatigues the metal. The car loses steering precision and, in advanced cases, cracks appear.\u003c\/p\u003e\n\u003cp\u003eThe side braces join the tower with the sheet metal surrounding it, so that the stress is distributed over a larger surface. The front of the bodywork gains rigidity and the tower is protected against fatigue.\u003c\/p\u003e\n\n\u003ch3\u003eMINI Version\u003c\/h3\u003e\n\u003cp\u003eThis version covers just enough area to give rigidity to the tower without the need for major work. It is sufficient for most modified street cars and for moderate sporty use. If you are looking for a wider brace for a competition car or for a tower that has already been heavily stressed, we have the V2 version, which is more complete.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe braces are made of 2 mm S355 structural steel, stamped and pressed. The pressing shapes the sheet metal and adds reliefs that increase its rigidity without the need to use a greater thickness.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey require welding to the bodywork. We recommend that this be done by a workshop with experience in sheet metal welding, cleaning the area down to the metal beforehand and protecting it afterwards with primer and paint. It is a good time to install them when changing shock absorbers or installing coilovers, because the area is already cleared.\u003c\/p\u003e\n\u003cp\u003eThey can be combined with a front tower bar to reinforce the front of the car even further.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771146834254,"sku":"DGSW.146","price":28.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote4-0146-bmw-e46-lateral-refuerzo-torretas-suspension-mini-vista-1.jpg?v=1793172779"},{"product_id":"refuerzo-soporte-brazo-trasero-bmw-e46-pro-v2","title":"PRO V2 reinforcement and repair kit for the rear longitudinal arm mount on BMW E46 (for welding)","description":"\u003cp\u003ePRO V2 reinforcement plate kit for the rear longitudinal arm mount on the BMW E46. This is the second version of this reinforcement, redesigned for more demanding uses and more complicated repairs. It is suitable for both repairing a damaged mount and reinforcing it before it fails, and it is welded to the bodywork.\u003c\/p\u003e\n\n\u003ch3\u003eA known E46 problem\u003c\/h3\u003e\n\u003cp\u003eThe rear longitudinal arm holds the wheel and is anchored to the bodywork in a sheet metal housing in front of the axle. On the E46, this area is famous for cracking over time. All the forces of acceleration, braking, and rear wheel support pass through it, and the original sheet metal is not designed for high loads over many years.\u003c\/p\u003e\n\u003cp\u003eIn drift cars, with more power or with firm suspension, the problem appears much sooner. First, fine cracks form around the mount, and if they are not addressed, the sheet metal eventually tears. The arm shifts, the rear wheel loses its alignment, and the car becomes unstable. Repairing a torn mount requires remaking a large part of the sheet metal.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the PRO V2 version improves\u003c\/h3\u003e\n\u003cp\u003eThis second version covers the mount area more completely than a basic reinforcement, and that is why it is designed for cars that are going to work hard or for mounts that already have significant damage. The plates are welded over the original housing, distribute the load over a much larger surface, and leave the mount stronger than the factory one.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThey are made of 3 mm S355 structural steel, laser-cut to fit exactly over the shape of the mount, and folded in a CNC press. This way they sit well on the bodywork and the welding is easier.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe rear arm must be removed, the area cleaned well down to the metal, and the plates welded. Ideally, this should be done during the preparation of the car or when repairing the rear suspension. We recommend that it be done by a workshop with experience in bodywork welding and that the area be protected afterwards with primer and paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46.\u003c\/p\u003e\n\u003cp\u003eFor the E36, we have a specific reinforcement kit for this same mount.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771147161934,"sku":"DGSW.147","price":57.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0147-bmw-e46-trasera-refuerzo-soporte-brazo-trasero-pro-v2-vista-1.jpg?v=1793092428"},{"product_id":"tacos-para-caja-de-cambios-de-poliuretano","title":"Reinforced gearbox mounts BMW E21, E30, E34, E36, E39, E46, E8X and E9X (pair)","description":"\u003cp\u003ePair of reinforced gearbox mounts for a wide range of rear-wheel-drive BMWs, from the E21 and E30 to the E46, E8X 1 Series and E9X 3 Series, including several M3 models. They replace the original rubber mounts and, thanks to their materials, last much longer than the standard parts. They have a black finish with zinc-plated metal parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat they are used for\u003c\/h3\u003e\n\u003cp\u003eThe gearbox mounts secure the rear of the gearbox to the chassis bracket and absorb its vibrations. Over time, the original rubber cracks and compresses, and the gearbox starts to move. This can be noticed through imprecise gear changes, transmission clunks when accelerating and releasing the throttle, and vibrations in the gear lever. In drift cars or those with high torque, wear is much faster.\u003c\/p\u003e\n\u003cp\u003eWith these mounts, the gearbox remains firmly in place. Gears engage more precisely and the transmission operates with less play, something that is even more noticeable when combined with a short shifter.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cp\u003eThe structure is made of S355 steel, with the base, thread and nuts zinc-plated against corrosion. The elastic element is military-grade rubber, the same type used in tanks and armored vehicles, chosen after extensive testing. Its hardness of 80 Shore A firmly holds the gearbox in place and filters out some of the vibrations. Compared to polyurethane, it handles heat better and wears down less.\u003c\/p\u003e\n\n\u003ch3\u003eOriginal part numbers replaced\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e23 70 1 141 614\u003c\/li\u003e\n\n\u003cli\u003e22 31 6 799 331\u003c\/li\u003e\n\n\u003cli\u003e23 71 1 175 424\u003c\/li\u003e\n\n\u003cli\u003e23 71 1 175 939\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series E81, E82, E87 and E88, including the 1M E82\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E21\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E30 (except M3)\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E36, including the M3\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E46, including the M3 (except xi\/xd all-wheel-drive versions)\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E90, E91, E92 and E93, including the M3 (except xi\/xd all-wheel-drive versions)\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series E34\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series E39\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe price is for the pair of mounts.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771149128014,"sku":"DGSW.155","price":57.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote4-0155-soportes-caja-cambios-poliuretano-vista-2.jpg?v=1793172779"},{"product_id":"soporte-extintor","title":"Fire extinguisher bracket for BMW using seat mounting points (E36, E46, E9X, E8X, and F3X)","description":"\u003cp\u003eSteel bracket for mounting a fire extinguisher in the cabin of several BMW models. It screws into the original floor holes where the seat is anchored, so the extinguisher is positioned in front of the driver's or front passenger's seat, secure and always within reach. No drilling of the floor is required.\u003c\/p\u003e\n\n\u003ch3\u003eWhy the fire extinguisher must be properly secured\u003c\/h3\u003e\n\u003cp\u003eIn most competitions, and in many track days and drifting events, carrying a fire extinguisher on board is mandatory. It also must be properly secured. An unsecured or poorly fastened fire extinguisher becomes a dangerous object in an accident or during hard braking and can be thrown around inside the cabin. It must also be placed where it can be quickly grabbed if needed.\u003c\/p\u003e\n\u003cp\u003eThis bracket does both. It firmly secures the fire extinguisher to the car's structure and places it at the footwell of one of the front seats, where the driver or front passenger can reach it in an instant.\u003c\/p\u003e\n\n\u003ch3\u003eSimple and adjustable installation\u003c\/h3\u003e\n\u003cp\u003eIt uses the original seat mounting points, so it can be installed in minutes without drilling any holes. It can be placed on the driver's or front passenger's side. The bracket has several mounting holes, allowing the fire extinguisher to be moved closer to or further from the seat so that it does not interfere with the footwell or pedals.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eIt is made of steel and powder-coated in black, a finish resistant to impacts and moisture from the floor.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E36, E46, E90, E91, E92, F30, F31 and M3 F80\u003c\/li\u003e\n\n\u003cli\u003eBMW 1 Series E81, E82, E87 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 4 Series F32 and M4 F82\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe fire extinguisher is not included. It is shown in the photos for reference only.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771150176590,"sku":"DGSW.174","price":20.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0174-soporte-extintor-vista-1_b34141ed-39e1-449d-81e5-74d631fe08e1.jpg?v=1793092539"},{"product_id":"brazos-regulables-e36-e46-z4-e85-e86","title":"Adjustable rear lower control arms BMW E36, E46 and Z4 (pair)","description":"\u003cp\u003ePair of adjustable rear lower control arms for the BMW E36, E46 and Z4. They are used to change the rear wheel camber, with a very wide adjustment range. They are common on drift cars, quarter-mile drag cars and stance projects where large wheels need to be fitted.\u003c\/p\u003e\n\n\u003ch3\u003eWhat these arms do\u003c\/h3\u003e\n\u003cp\u003eOn the rear axle of these BMWs, the lower arm determines the wheel camber, i.e. how much it tilts inwards or outwards when viewed from behind. The stock arm has a fixed length. If the car is lowered, the wheel gains negative camber due to the axle geometry itself, and there is no way to correct it. The tyre no longer makes full contact with the ground, loses traction and wears on the inner edge.\u003c\/p\u003e\n\u003cp\u003eWith an adjustable arm, the length is changed by turning the thread, and with it, the camber. The wheel can be returned to a correct setting or set to the desired value for each application.\u003c\/p\u003e\n\n\u003ch3\u003eTraction in drifting and drag racing\u003c\/h3\u003e\n\u003cp\u003eIn drifting, the rear tyre must make as flat a contact patch as possible to push hard and allow the drift to be controlled with the throttle. Something similar happens in quarter-mile racing. All the power is delivered through the rear axle in a straight line, and every millimetre of rubber in contact with the ground translates into a better launch. In both cases, adjusting the camber is one of the easiest ways to gain traction.\u003c\/p\u003e\n\n\u003ch3\u003eLarge wheels without modifying the arches\u003c\/h3\u003e\n\u003cp\u003eIf more negative camber is deliberately added, the top of the wheel tilts into the wheel arch. This allows wider wheels or wheels with less offset to fit without having to stretch or cut the arches, which is what is sought in many stance projects.\u003c\/p\u003e\n\n\u003ch3\u003eSpecial rubber bushings\u003c\/h3\u003e\n\u003cp\u003eInstead of uniball rod ends, these arms feature bushings made from military-grade rubber, the same type used in tanks and armoured vehicles, selected after extensive testing. They have a hardness of 80 Shore A, an intermediate rating that holds the arm firmly while still filtering out some vibrations. Compared to polyurethane, it withstands high temperatures better and wears less, so it retains its properties for longer. It is a good option for a car that is used in competition but also driven on the road.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe arms are made from thick-walled S355 steel tubing, turned and milled on CNC machines so that the threads and housings have exact dimensions. The mounting brackets are TIG welded. They are finished with black powder coating, which protects the steel from corrosion and stones better than liquid paint.\u003c\/p\u003e\n\u003cp\u003eThese arms have been tested in drifting and rallying, two applications that subject the rear axle to very high loads.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36 saloon, coupé, convertible and Touring\u003c\/li\u003e\n\n\u003cli\u003eBMW E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4 E85 and E86\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThey are not suitable for the E36 Compact, which has a different rear axle.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are fitted to the same points as the stock lower arms. Before installing them, it is advisable to set them to the length of the originals, and then a rear axle alignment must be carried out. Check the tightness of the lock nuts every so often.\u003c\/p\u003e\n\n\u003cp\u003eThe price is for the pair, left and right.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771150274894,"sku":"DGSW.29","price":123.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/2_c544961a-4111-46b0-9fab-4c02b2ea5c4c.jpg?v=1793110057"},{"product_id":"adaptadores-de-avance-regulables-para-bmw-e46-con-rotula-uniball","title":"Adjustable camber plates for BMW E46 with uniball joint","description":"\u003cp\u003eAdjustable adapter kit that replaces the silentblock mount of the rear mount of the front arm on the BMW E46. They feature a threaded uniball ball joint that allows you to modify the suspension caster and move the wheel forward or backward within the wheel arch. It is a highly sought-after part for preparing an E46 for drifting, although it is also suitable for anyone who wants firmer steering and geometry adjusted to their liking.\u003c\/p\u003e\n\n\u003ch3\u003eWhat they replace and what changes\u003c\/h3\u003e\n\u003cp\u003eFrom the factory, the E46 front arm is attached to the chassis at the rear by a rubber bushing housed in a mount. This rubber filters vibrations, but it also gives when the car brakes hard or corners hard, and at that moment the arm moves a few millimeters and the geometry changes.\u003c\/p\u003e\n\u003cp\u003eThese adapters replace the rubber with a uniball ball joint, a metal spherical joint that rotates freely but does not deform. The arm remains secured in place regardless of the load, and the steering responds immediately to every movement of the steering wheel. As a trade-off, more vibrations and some suspension noise reach the cabin, which is normal for this type of part.\u003c\/p\u003e\n\n\u003ch3\u003eCaster adjustment\u003c\/h3\u003e\n\u003cp\u003eCaster is the angle formed by the axis of rotation of the front wheel relative to the vertical, viewed from the side. The ball joint is threaded into the block, so by screwing it in or unscrewing it, the arm mount moves and the caster increases or decreases.\u003c\/p\u003e\n\u003cp\u003eWith more caster, the steering wheel returns to the center on its own with more force. In drifting, this makes countersteering much easier, because the steering turns on its own in the correct direction as soon as the driver lets go of the wheel. It also increases the negative camber of the outer wheel when turning, and the front tire grips better when the car is sideways. The adjustment has a lot of travel, so there is room to keep testing until you find the right setup.\u003c\/p\u003e\n\u003cp\u003eThe same adjustment is used to move the wheel forward or backward in the wheel arch. This is useful when the car has arms or angle kits that displace it, or simply to center it.\u003c\/p\u003e\n\n\u003ch3\u003eImportant before installing\u003c\/h3\u003e\n\u003cp\u003eDue to the shape of the original E46 arm, the boss where the bushing is housed must be sanded or slightly reduced so that it fits into the uniball ball joint. It is a small adjustment that is done with a file or a grinder with a sanding disc, removing material evenly until the boss fits into the ball joint without play. It is advisable to test frequently so as not to remove too much.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eRear-wheel drive BMW E46.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and setup\u003c\/h3\u003e\n\u003cp\u003eThe adapters screw into the mounting points of the original bracket. Both sides must be adjusted to the same measure, the lock nuts must be properly secured, and a full alignment must be done afterward, since changing the caster also changes the toe and camber. Check the tightness regularly, especially after every day of drifting or track use.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771151389006,"sku":"DGSW.86","price":147.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_ce5d7057-ea8e-48e5-a952-dc3c68c04aac.jpg?v=1793103876"},{"product_id":"brazos-superiores-traseros-regulables-con-uniball-para-bmw-e36-e46","title":"Adjustable upper rear control arms with uniball BMW E36, E46 and Z4 (pair)","description":"\u003cp\u003ePair of adjustable upper rear control arms with uniball rod ends for the BMW E36, E46 and Z4. They allow you to change the rear wheel camber and hold the axle much more firmly than the standard arms. They are used in drifting, quarter-mile drag racing and very low stance cars.\u003c\/p\u003e\n\n\u003ch3\u003eTheir role on the rear axle\u003c\/h3\u003e\n\u003cp\u003eThe rear wheel of these BMWs is supported, among other parts, by an upper and a lower arm. The difference in length between the two determines the camber, which is how much the wheel tilts when viewed from behind. By lengthening or shortening the upper arm, the top of the wheel moves outwards or inwards and the camber changes. This adjustment is essential when the car is lowered, because lowering the bodywork gives the rear wheel negative camber on its own and the tire stops having full contact with the ground.\u003c\/p\u003e\n\n\u003ch3\u003eMore traction on the drive axle\u003c\/h3\u003e\n\u003cp\u003eA tire that makes contact with its full width transmits more power to the ground. In drifting, this translates into a car that pushes hard in the middle of a slide and a drift that is better controlled with the throttle. In quarter-mile racing, every millimeter of rubber in contact improves the launch and reduces wheelspin. That is why adjusting the rear camber is usually one of the first things done when preparing a BMW for any of these uses.\u003c\/p\u003e\n\n\u003ch3\u003eVery low cars and large wheels\u003c\/h3\u003e\n\u003cp\u003eThe arms are designed for cars with large drops, where the standard geometry runs out of room. They also allow the opposite: to deliberately give more negative camber so that the wheel tucks into the wheel arch. This allows wide or low-offset wheels to fit without stretching or cutting the fenders.\u003c\/p\u003e\n\n\u003ch3\u003eReinforced uniball rod ends\u003c\/h3\u003e\n\u003cp\u003eThe ends feature reinforced chrome-molybdenum steel uniball rod ends, chosen after many tests. A uniball is a metal spherical joint that does not deform under load, unlike the original rubber bushing. The wheel thus maintains the position it was given in the alignment, even when accelerating flat out or under full load. In return, more vibration reaches the cabin, which is normal for this type of part. Chrome-molybdenum withstands impacts and fatigue without cracking.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eEach arm is made with thick-walled S355 steel tubing, turned and milled on a CNC machine so that the threads and housings have exact dimensions. The mountings are TIG welded. The finish is black powder coating, which is more resistant to corrosion and stones than conventional paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36 sedan, coupé, convertible and Touring\u003c\/li\u003e\n\n\u003cli\u003eBMW E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4 E85 and E86\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThey are not suitable for the E36 Compact, which has a different rear axle. If combined with our adjustable lower arms for these same models, the camber adjustment range is even greater.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are placed in place of the standard upper arms, using the original mountings. Before installing them, it is advisable to match their length to the originals. Afterwards, you must perform a rear axle alignment and occasionally check the tightness of the lock nuts.\u003c\/p\u003e\n\n\u003cp\u003eThe price is for the pair, left side and right side.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771152601422,"sku":"DGSW.133","price":139.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_77418145-0367-4f5c-ae94-3447dd962141.jpg?v=1793110187"},{"product_id":"soportes-para-ajustar-convergencia-trasera-en-bmw-e36-e46-z4","title":"Rear longitudinal control arm mounts with extended camber adjustment for BMW E36, E46 and Z4 (pair)","description":"\u003cp\u003ePair of supports for the front mounting of the rear longitudinal arm in the BMW E36, E46 and Z4. They replace the factory supports and greatly increase the adjustment range for the rear wheel toe. They are a very useful part for drift, track or stance cars, as well as for road cars whose toe cannot be kept in place with the original parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is this support\u003c\/h3\u003e\n\u003cp\u003eThe rear longitudinal arm holds the wheel hub and goes from the axle forward to a support bolted to the bodywork. The arm bushing is housed in that support, and its position determines where the wheel points when viewed from above. That angle is the toe. If the wheels point slightly inward, the car is planted and stable. If they point outward or too far inward, it becomes nervous and the tires wear out quickly.\u003c\/p\u003e\n\n\u003ch3\u003eThe limit of the factory support\u003c\/h3\u003e\n\u003cp\u003eThe original support has mounting holes with very little adjustment range, designed to correct small factory differences. As soon as the car is lowered, fitted with other arms or bushings, or simply has bodywork that is somewhat tired from age, that range falls short. The workshop reaches the adjustment limit and the toe remains out of spec. This happens to both cars prepared for competition and daily-use cars.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is improved\u003c\/h3\u003e\n\u003cp\u003eThese supports have a new design, with a much greater adjustment range than the original. They allow the rear toe to be set exactly where needed, whether to restore factory specs on a lowered car or to achieve a specific drift or track setup. Well-adjusted rear toe provides stability in a straight line, progressive support in corners and even tire wear.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E36 sedan, coupe, convertible and Touring\u003c\/li\u003e\n\n\u003cli\u003eBMW E46\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4 E85 and E86\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt is not suitable for the E36 Compact, which has a different rear axle.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are installed in place of the original supports, at the same points on the bodywork. It is a good time to also replace the arm bushings if they are worn. After installing them, a full rear axle alignment must be carried out.\u003c\/p\u003e\n\n\u003cp\u003eThe price is for the pair, supports for both rear wheels.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771152961870,"sku":"DGSW.141","price":57.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_3acfa1f8-cba5-4b94-b3f6-9640299c2d22.jpg?v=1793285273"},{"product_id":"juego-de-bieletas-estabilizadora-trasera-bmw-e46-z4","title":"Short 80 mm sway bar end links for BMW E46, E46 Compact and Z4","description":"\u003cp\u003eSet of 80 mm short sway bar end links for the BMW E46 anti-roll bar, including the Compact, and the Z4. Their design is intended for lowered cars and demanding uses such as drifting, rallying, or track days, although they are also a good upgrade for a powerful street car. Thanks to the materials used, they last much longer than the original end links.\u003c\/p\u003e\n\n\u003ch3\u003eThe function of the end link\u003c\/h3\u003e\n\u003cp\u003eThe anti-roll bar reduces body roll in corners by connecting the left wheel to the right. To do its job, each end of the bar needs to be attached to the suspension, and that is what the end link does. If that connection gives way or has play, the bar reacts late, the car rolls more, and loses precision during weight transfer.\u003c\/p\u003e\n\n\u003ch3\u003eWhy 80 mm\u003c\/h3\u003e\n\u003cp\u003eWhen an E46 or a Z4 is lowered with coilovers or short springs, the suspension is compressed relative to its stock position. The anti-roll bar ends up tilted and works outside its ideal zone. In some cases, it even bottoms out prematurely or touches nearby parts. A shorter end link corrects that angle and gives the bar back the travel it needs, so that it acts from the beginning of the roll and progressively.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing and materials\u003c\/h3\u003e\n\u003cp\u003eBoth the body and the bracket are made of S355 steel, with thicknesses of 3 and 4 mm. It is a very strong structural steel that withstands stone and curb impacts and the loads of intensive use.\u003c\/p\u003e\n\u003cp\u003eThe rubber parts are made of a military-grade compound, like the one used in tanks and armored vehicles, selected after many tests. It has a hardness of 80 Shore A, enough for the bar to work without play and without transmitting sharp impacts to the cabin. Compared to polyurethane, it withstands higher temperatures and wears out less, so its behavior remains stable over the miles.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E46 sedan, coupe, convertible, and Touring\u003c\/li\u003e\n\n\u003cli\u003eBMW E46 Compact\u003c\/li\u003e\n\n\u003cli\u003eBMW Z4\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are fixed in the same points as the stock end links, without modifications. The final tightening should be done with the car on the ground and resting on its wheels, so that the rubber remains in its working position.\u003c\/p\u003e\n\n\u003cp\u003eThe price corresponds to the complete set.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771154796878,"sku":"DGSW.166","price":73.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_43c47ac8-5764-491b-ad3c-deecb6574876.jpg?v=1793105627"},{"product_id":"paneles-puertas-delanteras-para-bmw-e46-coupe","title":"BMW E46 Coupé aluminum door panels (pair)","description":"\u003cp\u003ePair of aluminum door panels for the BMW E46 coupé. They replace the bulky and heavy original door cards with 1.2 kg aluminum sheet per panel, painted black on the visible side. They are ideal for E46 coupé drift, rally and circuit cars. The set includes the left and right panel.\u003c\/p\u003e\n\n\u003ch3\u003eLess weight on the doors\u003c\/h3\u003e\n\u003cp\u003eThe standard E46 coupé door card is large and contains upholstery, foam, speakers, plastics and mechanisms. All of that adds weight that is not needed in a competition car. With the aluminum panels, the doors become much lighter and the interior takes on a clean, race car look.\u003c\/p\u003e\n\n\u003ch3\u003eImportant: interior handle\u003c\/h3\u003e\n\u003cp\u003eTo install these panels, the interior opening handle must be moved to the rear of the door. From there, the door opens by moving the hand backward, over the shoulder. This is a common change in competition cars and you get used to it quickly, but it is worth knowing before buying. The set includes the necessary bushings to fix the handle to the panel.\u003c\/p\u003e\n\n\u003ch3\u003eRigidity in fiber doors\u003c\/h3\u003e\n\u003cp\u003eIn cars with fiberglass doors, the panel also provides rigidity. Fixed on the inside, it prevents the door from bending when opening and closing it and from vibrating while driving.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing and installation\u003c\/h3\u003e\n\u003cp\u003eEach panel is CNC cut from 1 mm aluminum sheet and powder coated in black. It can be fixed however you prefer, although we recommend rivets or self-tapping screws, which hold the panel well and do not loosen with vibrations.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 coupé.\u003c\/p\u003e\n\u003cp\u003eIn our store you also have the aluminum rear bulkhead for the E46 coupé, to complete the interior.\u003c\/p\u003e\n\n\u003cp\u003eThe price corresponds to the pair, left side and right side.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771157549390,"sku":"DGSW.99","price":81.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/099-bmw-e46-coupe-paneles-delanteros-aluminio-puertas-vista-1_7a53f3c5-8951-4530-bd5e-8eabc8226767.jpg?v=1793092537"},{"product_id":"paneles-traseros-para-bmw-e46-coupe","title":"Rear aluminum quarter panels for BMW E46 coupe (pair)","description":"\u003cp\u003ePair of aluminum panels for the rear side panels of the BMW E46 coupé cabin, next to the rear seats. Each weighs 0.8 kg and comes painted black on the visible side. Together with the door panels and the rear bulkhead for the E46 coupé, they complete the interior of a drift, rally, or circuit car. The set includes the left and right panels.\u003c\/p\u003e\n\n\u003ch3\u003eA closed and clean interior\u003c\/h3\u003e\n\u003cp\u003eWhen the rear of an E46 coupé is emptied, the wheel arch sheet metal is exposed and leaves gaps through which tire smoke in drifting and dust from the track or road enter. The panels cover these sides, stop this entry and give the rear area a tidy finish, without exposed sheet metal or holes.\u003c\/p\u003e\n\n\u003ch3\u003eLightweight and resistant\u003c\/h3\u003e\n\u003cp\u003eEach panel is CNC cut in 1 mm aluminum sheet and weighs 0.8 kg, much less than the standard trim. The visible side has a black powder coating, which withstands rubbing and impacts well and matches the rest of the panels in the range.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey can be fixed with screws, rivets, or adhesive. We recommend rivets, which do not loosen with vibrations and remain almost flush with the surface.\u003c\/p\u003e\n\u003cp\u003eThese panels have been tested in drifting and rallying.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 coupé, rear sides.\u003c\/p\u003e\n\u003cp\u003eComplete the interior with our aluminum door panels and the rear bulkhead for the E46 coupé.\u003c\/p\u003e\n\n\u003cp\u003eThe price corresponds to the pair, left side and right side.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771158040910,"sku":"DGSW.100","price":78.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-0100-e46-coupe-paneles-puerta-traseros-aluminio-vista-1.jpg?v=1793173547"},{"product_id":"reposapies-bmw-e46","title":"Aluminum footboard with footrest for BMW E46 passenger","description":"\u003cp\u003eAluminum floor with footrest for the BMW E46 co-driver. It covers the footwell with a textured aluminum plate and includes an angled footrest for the co-driver to rest their feet on. It provides comfort and safety for the passenger and a very professional look to the interior of a drift, rally, rallycross, or drag car. Suitable for the E46 Coupé, Sedan, Touring, and Compact.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is it for?\u003c\/h3\u003e\n\u003cp\u003eWhen stripping an E46 interior for competition, the carpeting and insulation are removed, leaving the co-driver's footwell exposed with the textured metal floor pan, which is uncomfortable. This floor creates a flat, firm surface, and the footrest gives the co-driver a place to push their feet to stay securely braced in the seat during braking, cornering, and jumps. This is especially important in rallying, as the co-driver must read the pace notes without moving around in every corner.\u003c\/p\u003e\n\n\u003ch3\u003eAnti-slip texture\u003c\/h3\u003e\n\u003cp\u003eThe plates feature a textured pattern that serves two purposes. It makes the aluminum more rigid, so it does not bend underfoot, and provides an anti-slip surface, so shoes do not slip even when wet.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eBoth the floor and the footrest are made from 3 mm aluminum, cut using a CNC press brake. It is a lightweight material that does not rust and withstands heavy use well.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is quick and easy to install using rivets or standard screws. The kit includes 4 support legs that seat the floor on the car's metal bodywork and prevent it from moving or vibrating.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 Coupé, Sedan, Touring, and Compact, co-driver side.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771159023950,"sku":"DGSW.117","price":123.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/reposapies-bmw-e46-2.jpg?v=1793348465"},{"product_id":"panel-cortafuegos-del-maletero-para-bmw-e46","title":"Aluminum rear bulkhead (firewall) for BMW E46 coupe","description":"\u003cp\u003eRear aluminum bulkhead, or firewall, for the BMW E46 coupé. It closes the gap between the cabin and the trunk when the rear seats are removed. It weighs 1.3 kg and is painted black on both sides. It is common in E46 coupés prepared for drifting, rallying, or track days.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it solves\u003c\/h3\u003e\n\u003cp\u003eRemoving the rear seat and backrest is one of the first things done to lighten a competition E46. The problem is that the trunk remains open and everything that happens there passes into the cabin. In drifting, tire smoke seeps in from behind and ends up inside the car. If the trunk also contains a competition fuel tank, the battery, or the fuel system, it is best to isolate it from the driver.\u003c\/p\u003e\n\u003cp\u003eThe bulkhead does exactly that. It separates the two areas, slows the entry of smoke and dust, and gives the interior a neat, race-car look, instead of leaving the trunk panel exposed.\u003c\/p\u003e\n\n\u003ch3\u003e1 mm aluminum\u003c\/h3\u003e\n\u003cp\u003eIt is made with 1 mm CNC-cut aluminum sheet, so the weight stays at 1.3 kg. It weighs much less than the rear seats it replaces, so the weight savings are maintained. The black powder coating covers both sides, protects the aluminum, and looks good from both inside the car and from the trunk.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe mounting method is up to the user. It can be screwed, glued, or riveted. We recommend rivets, because they hold the bulkhead firmly, do not come loose with vibrations, and sit practically flush.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 coupé.\u003c\/p\u003e\n\u003cp\u003eTo finish the interior, our store also has front and rear aluminum door panels.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771160695118,"sku":"DGSW.128","price":81.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-0128-e46-panel-separador-maletero-vista-1.jpg?v=1793173608"},{"product_id":"difusor-para-bmw-e46-en-aluminio","title":"BMW E46 aluminum rear diffuser for M bumper","description":"\u003cp\u003eAluminum rear diffuser for the BMW E46 sedan, coupe, and Touring with an M package rear bumper. It is fitted under the bumper and gives the car a racing look, while also making it appear lower. It is an original design, specifically created for this bumper.\u003c\/p\u003e\n\n\u003ch3\u003eTwo ways to mount it\u003c\/h3\u003e\n\u003cp\u003eThe diffuser can be assembled in two different ways, depending on the look you prefer for the rear of the car. You can see both options fitted in the product photos, so you can choose the one you like best before installing it.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, a lightweight material that does not rust and withstands the scuffs and minor impacts that the lower part of a bumper can receive. This is important on a lowered E46, where the diffuser sits very close to the ground.\u003c\/p\u003e\n\n\u003ch3\u003eShipped in pieces\u003c\/h3\u003e\n\u003cp\u003eDue to its dimensions, and to prevent damage during transport, it is shipped unassembled so that you can assemble it at home. It includes all the necessary hardware for assembly. The photos show the diffuser before assembly and fitted to various bumpers.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 sedan, coupe, and Touring with an M package rear bumper.\u003c\/p\u003e\n\u003cp\u003eIt is not suitable for the standard rear bumper without the M package. We have a specific diffuser for the E36 with M bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771163644238,"sku":"DGSW.129","price":139.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0129-bmw-e46-difusor-vista-4.jpg?v=1793092426"},{"product_id":"refuerzo-trasero-chasis-bmw-e46","title":"Floor reinforcement kit for BMW E46 and M3 rear subframe mounts (for welding)","description":"\u003cp\u003eReinforcement kit for the BMW E46 floor in the area where the rear subframe is anchored. It is suitable for reinforcing a healthy floor before problems arise, or for repairing and reinforcing a floor that is already cracked. It is also suitable for the M3 E46, where it has been tested under the highest loads.\u003c\/p\u003e\n\n\u003ch3\u003eThe E46's best-known weak point\u003c\/h3\u003e\n\u003cp\u003eThe rear subframe supports the differential and the entire rear suspension, and is bolted to the car's floor. In the E46, the floor sheet metal around these mounting points is too weak for the forces it receives. Over time, it cracks, and in severe cases, the mounting points can tear out of the floor. This is one of the best-known failures of this model, especially in the M3 and in any E46 with more power or that is used for drifting or track racing.\u003c\/p\u003e\n\u003cp\u003eSymptoms usually start with knocks and noises at the rear when accelerating or lifting off the throttle, and a feeling that the rear axle is moving. If left untreated, the cracks grow until they compromise the mounting of the subframe.\u003c\/p\u003e\n\n\u003ch3\u003eReinforcement shaped to fit the floor\u003c\/h3\u003e\n\u003cp\u003eThe kit is not just flat sheets. Each piece is bent to follow the contours and folds of the E46 floor in that area, so that it rests on its entire surface and the welding remains continuous. It covers a large area around the mounting points, spreading the load over much more sheet metal than the original.\u003c\/p\u003e\n\u003cp\u003eDespite its size, the design respects the other elements that are anchored to the floor in that area, so it can be welded without having to modify or relocate other parts.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe parts are made from 3 mm S355 structural steel sheet, laser-cut and bent using a CNC press. The kit has been tested on an M3 E46, the model that subjects this area to the greatest stress.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe reinforcements are welded onto the original floor. To do this, the rear subframe must be lowered, the sheet metal cleaned down to bare metal, and, if there are cracks, repaired before welding the reinforcement. We recommend that this be done by a welding professional and that the area be protected afterwards with primer and paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46, including the M3 E46.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771164135758,"sku":"DGSW.33","price":61.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_28445706-f9f9-4d05-9e7d-028749ccc3ad.jpg?v=1793274721"},{"product_id":"colector-de-escape-schmiedmann-e46-m52-m54","title":"Schmiedmann E46 M52 M54 exhaust manifold","description":"\u003cp\u003eSchmiedmann M52\/M54 high-flow sports exhaust manifold\u003cbr\u003e This product is only valid for left-hand drive BMWs.\u003cbr\u003e All 6-cylinder non-XI models are compatible with the product.\u003cbr\u003e Please note, there is a dent in 1 manifold, made so the manifold fits and does not hit the gearbox!\u003cbr\u003e Modifications and adjustments must be expected when installing this system.\u003cbr\u003e We recommend using these bolts 11-12-7-593-376 because they are shorter, which makes it easier to mount the nuts when installing the manifold.\u003cbr\u003e Weight: 10.00 KG\u003cbr\u003e Dimensions: 73x37x17 cm\u003cbr\u003e Number per car: 1 pcs.\u003cbr\u003e The flange is not made of stainless steel.\u003cbr\u003e Pipe dimensions:\u003cbr\u003e Outlet pipe: 50MM\u003cbr\u003e Inlet pipe: 42X30MM\u003c\/p\u003e","brand":"Schmiedmann","offers":[{"title":"Default Title","offer_id":50771172098382,"sku":"DGSCM5254MANI","price":238.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGSCM5254MANI-1-COLECTORES-DE-ESCAPE-BMW-E46_5b10d44e-4c02-4bd1-8a78-eaf5cc2d7ea1.jpg?v=1738580404"},{"product_id":"linea-con-catalizadores-schmiedmann-para-e46-m52-m54","title":"Downpipe with Schmiedmann catalytic converters for E46 M52 M54","description":"\u003cp\u003eSchmiedmann 300-cell high-flow catalytic converters and Euro3D4 metal sport M52\/M54\u003cbr\u003e This product is only valid for BMWs driven on the left.\u003cbr\u003e All 6-cylinder models except XI.\u003cbr\u003e Modifications and adjustments are to be expected when installing this system.\u003cbr\u003e Weight: 14.00 KG\u003cbr\u003e Dimensions: 147x47x23 cm\u003cbr\u003e Please note: Can only be installed in conjunction with our exhaust line with reference DGSCM5254MANI!\u003cbr\u003e Or alternatively, adapt the original one from the vehicle to make them match. \u003c\/p\u003e","brand":"Schmiedmann","offers":[{"title":"Default Title","offer_id":50771173671246,"sku":"DGSCM5254KAT","price":508.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGSCM5254KAT-LINEA-ESCAPE-BMW-E46.jpg?v=1738580763"},{"product_id":"cono-de-volante-bmw-e46-98-06-e90-05-13-occ-motorsport","title":"BMW E46 98-06\/E90 05-13 Steering Wheel Hub OCC Motorsport","description":"\u003cp\u003eOCC Motorsport steering wheel hub for BMW E46 98-06\/E90 05-13. It is specific to these models and allows for the installation of a sports steering wheel in place of the original.\u003c\/p\u003e\u003cp\u003eIt has a 70 mm bolt pattern, the standard size for sports steering wheels, so it is compatible with OCC steering wheels as well as common brands like Sparco, Momo, OMP, or Sabelt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoad use.\u003c\/strong\u003e In a street car, it can only be homologated if the original does not have a steering wheel airbag, and it requires a project and modification to be included in the vehicle's technical data sheet. For track or simulator use, there is no such requirement.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50771183993166,"sku":"DGOCCH546","price":48.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cono-volante-occ-occh546.jpg?v=1738580458"},{"product_id":"pletinas-angulo-de-giro-30-bmw-e46-driftmax","title":"Driftmax 30% angle steering lock plates BMW E46","description":"\u003cp\u003eDriftmax plates to increase the steering angle of the BMW E46. They are CNC machined from aluminum and bolt on, with no welding required, allowing the front wheels to turn further.\u003c\/p\u003e\n\u003cp\u003eA greater steering angle lets you hold more aggressive drift angles without losing steering. Installation is fairly straightforward, although some minor adjustments may be needed. Sold as a pair with the necessary hardware and exclusively for the E46. After installing them, perform an alignment.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor BMW E46 only\u003c\/li\u003e\n\n\u003cli\u003eCNC machined aluminum\u003c\/li\u003e\n\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\n\u003cli\u003ePair with hardware\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Driftmax","offers":[{"title":"Default Title","offer_id":50771190841678,"sku":"DGDS.010","price":73.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/large-e46_1_2.jpg?v=1738580873"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/collections\/Captura_de_pantalla_2024-10-27_a_las_11.11.24.png?v=1731052558","url":"https:\/\/driftandgrip.com\/en\/collections\/bmw-e46.oembed?page=11","provider":"Drift \u0026 Grip","version":"1.0","type":"link"}