{"title":"Bodywork","description":"\u003cp\u003eReducing weight is one of the cheapest ways to gain performance. For bodywork, we have hoods, wide fenders, doors, tailgates, spoilers, lips, side skirts, and diffusers in fiberglass, carbon fiber, or aluminum for cars from many brands.\u003c\/p\u003e\n\u003cp\u003eIf you have a BMW, the specific bodywork is gathered in \u003ca href=\"\/en\/collections\/carroceria-bmw-e46\"\u003eBMW E46 bodywork\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/carroceria-bmw-e36\"\u003eBMW E36 bodywork\u003c\/a\u003e. You also have GReddy × Voltex aerodynamic parts for Japanese cars and our aluminum \u003ca href=\"\/en\/collections\/difusores-traseros\"\u003erear diffusers\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFiberglass parts must be prepared and painted, and as with any part of this type, some adjustments may be needed during installation. These are large parts that ship via freight agency, so if you are going to order several, contact us and we will calculate combined shipping for you.\u003c\/p\u003e","products":[{"product_id":"spliter-frontal-e46-pack-m-v1","title":"BMW E46 aluminum front splitter for M bumpers","description":"\u003cp\u003eAluminum front splitter for the BMW E46 with the M package front bumper. It mounts to the bottom of the bumper and adds a flat lip that protrudes forward, like on race cars. The E46 gains a more aggressive look and appears lower. It is a custom design, made to fit the E46 M bumper.\u003c\/p\u003e\n\n\u003ch3\u003eThe finishing touch for a drift or track E46\u003c\/h3\u003e\n\u003cp\u003eThe M bumper is one of the most common aesthetic upgrades for the E46, and the splitter is the next step. It finishes the front end with a low, straight line, emphasizes the race car character, and adds a distinctive detail, as it is not a factory part or a design that can be found everywhere.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, which is lightweight, rustproof, and resistant to scuffs. The finish is black powder coating, oven-dried, which protects the aluminum and matches any body color. On a lowered E46, the splitter also protects the lower edge of the bumper. If it gets damaged, it is much cheaper to replace than the bumper.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 with M package front bumper.\u003c\/p\u003e\n\u003cp\u003eIt is not compatible with the stock front bumper. In the photos you can see the splitter before installation and fitted to various bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771128680782,"sku":"DGSW.34","price":114.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/034.jpg?v=1793285545"},{"product_id":"spliter-frontal-e36-gt-schwert","title":"Aluminum front splitter for BMW E36 and E30","description":"\u003cp\u003eAluminum front splitter for the BMW E36 and E30. It is mounted under the front bumper and extends it with a flat panel, giving the car a racing look and making it appear lower. It is an original design, so it is an unusual part that sets your car apart from the rest.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it offers\u003c\/h3\u003e\n\u003cp\u003eThe splitter is the flat piece that protrudes from under the bumper on race cars. On an E36 or E30 used for drifting or track racing, it finishes off the front end and gives it a much more aggressive character. It also partially protects the lower edge of the bumper, which is the first thing to make contact with a curb or a garage entrance when the car is lowered.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and dimensions\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, a lightweight material that does not rust and withstands scuffs well. If it gets damaged over time, the splitter is much cheaper to replace than the bumper.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eHeight: 55 mm\u003c\/li\u003e\n\n\u003cli\u003eWidth: 290 mm\u003c\/li\u003e\n\n\u003cli\u003eLength: 1,390 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDimensions measured at the widest points.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E36\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series E30\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIn the photos you can see the splitter before assembly and fitted to several example bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771129073998,"sku":"DGSW.35","price":114.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote4-035-e36-gt-schwert-splitter-vista-035.jpg?v=1793172745"},{"product_id":"spliter-frontal-e30-is","title":"Front aluminum splitter for BMW E30 with iS-style lip","description":"\u003cp\u003eAluminum front splitter for the BMW E30 that fits the iS-style front lip, the lower front bumper spoiler fitted to the 318iS and 325iS models. It attaches to that lip and extends forward with a flat sheet, giving the car a racing look and making it appear lower. It is an original design.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it adds\u003c\/h3\u003e\n\u003cp\u003eThe splitter is the flat piece that protrudes from under the front bumper on race cars. On an E30 with the iS lip, it finishes off the front end, toughens up the look, and makes it stand out from a road-going E30. It is one of the most recognizable details of a drift or circuit car.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet. Aluminum is lightweight, does not rust, and withstands well the minor scrapes and bumps that the lower front end receives, which is inevitable on a lowered E30. If it gets damaged over time, it is an easy and affordable part to replace, much more so than the lip or the bumper.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E30 with an iS-style front lip.\u003c\/p\u003e\n\u003cp\u003eIt is not suitable for the standard front bumper without the iS lip. In the photos you can see the splitter before installation and fitted on several cars.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771129598286,"sku":"DGSW.36","price":106.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote6-036-e30-is-splitter-vista-36.jpg?v=1793173605"},{"product_id":"spliter-frontal-e39","title":"Front aluminum splitter for BMW E39 M bumpers","description":"\u003cp\u003eAluminum front splitter for the BMW 5 Series E39 with an M-package front bumper. It attaches to the bottom of the bumper and extends it with a flat panel that gives the car a racing look and makes it appear lower. It is an original design, specifically made for the E39 M bumper.\u003c\/p\u003e\n\n\u003ch3\u003eAn E39 with a different character\u003c\/h3\u003e\n\u003cp\u003eThe E39 is a large, elegant sedan, and more and more people are converting it into a drift car or giving it a stance look. The splitter completely changes the look of the front end. The M bumper, already sporty, gets a low, aggressive finish typical of a race car, and the whole car appears closer to the ground.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, which is lightweight and rustproof, and can withstand the scrapes of a lowered car. It also protects the lower edge of the bumper, and if damaged, the splitter is much cheaper to replace than the bumper.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 5 Series E39 with an M-package front bumper.\u003c\/p\u003e\n\u003cp\u003eIt is not suitable for the standard front bumper. In the photos, you can see the splitter before installation and fitted to several bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771130122574,"sku":"DGSW.37","price":114.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-037-e39-splitter-vista-37.jpg?v=1793173648"},{"product_id":"difusor-trasero-universal","title":"Universal adjustable aluminum rear diffuser (BMW 1, 2, 3 and 5 Series and other brands)","description":"\u003cp\u003eUniversal aluminum rear diffuser to be mounted under the rear bumper. It gives the car a racing look, makes it appear lower, and adds an unusual piece that sets it apart from the rest. It is designed for a good number of BMW 1, 2, 3 and 5 Series, but can also be adapted to bumpers from many other brands. It is an original design.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is it universal?\u003c\/h3\u003e\n\u003cp\u003eThe part of the diffuser that attaches to the bumper is completely flat. Thanks to this, it can be supported on the underside of very different bumpers, without depending on the shape of a specific model. With a little ingenuity, it fits almost any car, although it is advisable to position it before fixing it to check that it fits the shape of the bumper and the exhaust.\u003c\/p\u003e\n\n\u003ch3\u003eConfigurable to your liking\u003c\/h3\u003e\n\u003cp\u003eThe diffuser consists of several pieces, and each one is placed however you prefer:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eIn the center, it accommodates 2 or 3 fins, placed with the spacing you choose.\u003c\/li\u003e\n\n\u003cli\u003eThe two fins at the ends are independent pieces and can also be placed wherever they look best.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThis allows it to be adapted to the width of the bumper, the position of the exhaust outlets, and the style of the car. Each installed diffuser ends up being different. In the photos you will see the diffuser before assembly and fitted on several example bumpers.\u003c\/p\u003e\n\n\u003ch3\u003eMeasurements\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWidth of the main piece mounting surface: 81 cm\u003c\/li\u003e\n\n\u003cli\u003eDepth of the main piece mounting surface: 12 cm\u003c\/li\u003e\n\n\u003cli\u003eMounting surface of each side fin: 15 cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made of 3 mm aluminum sheet, lightweight, stainless, and resistant to the scuffs that the lower part of the bumper suffers in lowered cars.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series: E82 and E88\u003c\/li\u003e\n\n\u003cli\u003eBMW 2 Series: F22, F23 and M2 F87\u003c\/li\u003e\n\n\u003cli\u003eBMW 3 Series: E36, E36 Compact, E46, E90, E92, E93, F30, F31, F32, F33, F34, M3 F80 and M4 F82\u003c\/li\u003e\n\n\u003cli\u003eBMW 5 Series: E39\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIt can also be adapted to bumpers from other brands with a lower area where the flat mounting surface can be supported. It requires adjustment during installation.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771131367758,"sku":"DGSW.39","price":136.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/lote7-039-universal-difusor-trasero-vista-1.jpg?v=1793173650"},{"product_id":"cierre-capo-y-maletero-universal-v1","title":"Black universal quick-release hood pins (pair)","description":"\u003cp\u003ePair of black quick-release pin fasteners for securing hoods, bumpers, trunk lids, and other bodywork components. They are commonly used on drift, rally, and rallycross cars, where parts need to be removed and reinstalled in seconds. The set includes two fasteners and all the hardware required for installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat they are used for\u003c\/h3\u003e\n\u003cp\u003eBodywork on competition cars takes a beating. A bumper that makes contact with a wall or tire, a hood that needs to be quickly lifted in the paddock to check the engine, or a trunk lid replaced with a fiberglass one. With factory mounts, removing and reinstalling these parts takes time and tools. These fasteners allow them to be released and secured by hand, without tools, in very little time.\u003c\/p\u003e\n\u003cp\u003eThey are also used as a safety restraint. A fiberglass hood or trunk lid lacks the rigidity of a sheet metal one, and at high speeds, air entering underneath can lift it. The fasteners keep it secured to the bodywork even if the original latch fails or is absent.\u003c\/p\u003e\n\n\u003ch3\u003eHow they work\u003c\/h3\u003e\n\u003cp\u003eEach fastener has a base that screws onto the bodywork component and a pin that passes through and locks it. To release the component, simply release the pin, and to secure it, do the opposite. It is a simple, fast system that is easy to operate even with gloves.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cp\u003eThe fastener bodies are made of durable technical plastic, and the metal parts are zinc-coated to protect them from corrosion. They were designed first and foremost to perform well and last, without compromising their appearance. The black finish blends discreetly with any body color and looks great on cars with a competition aesthetic.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suitable for hoods, front and rear bumpers, trunk lids, and other bodywork components on any car.\u003c\/p\u003e\n\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e2 quick-release pin fasteners\u003c\/li\u003e\n\n\u003cli\u003eScrews and nuts for installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771141951822,"sku":"DGSW.91","price":13.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_68a7f102-fd8d-4402-b334-506be7f47b62.jpg?v=1793110244"},{"product_id":"difusor-para-bmw-e36-en-aluminio","title":"Adjustable aluminum rear diffuser for BMW E36 M and M3 bumpers","description":"\u003cp\u003eAluminum rear diffuser for the BMW E36 with an M package or M3 rear bumper. It mounts to the bottom of the bumper and gives the car a racing look while visually making it appear lower. It is an original design, so you won't find the same one on other cars.\u003c\/p\u003e\n\n\u003ch3\u003eAdjustable design\u003c\/h3\u003e\n\u003cp\u003eTo adapt to each car, the diffuser has two adjustable sections. The two central fins can be pulled further back or less, depending on how pronounced you want the diffuser to be. The sides have an adjustable angle, so they can be set to fit the car's muffler or exhaust without clashing or leaving awkward gaps.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet. Aluminum is lightweight, does not rust, and withstands the minor bumps and scrapes that the bottom of a bumper suffers, especially on lowered cars.\u003c\/p\u003e\n\n\u003ch3\u003eShips unassembled\u003c\/h3\u003e\n\u003cp\u003eDue to its size, and to prevent damage during transport, the diffuser is shipped in pieces to be assembled at home. It includes all the necessary hardware to join them. In the photos, you can see the diffuser before assembly and already fitted on different bumpers.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E36 sedan, coupe, and Touring with an M package rear bumper, and BMW M3 E36.\u003c\/p\u003e\n\u003cp\u003eIt is not suitable for the standard rear bumper without the M package.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771159843150,"sku":"DGSW.125","price":139.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0125-bmw-e36-difusor-vista-1_37ebd28c-b500-4219-bcc8-90f15284a876.jpg?v=1793092595"},{"product_id":"difusor-para-bmw-e46-en-aluminio","title":"BMW E46 aluminum rear diffuser for M bumper","description":"\u003cp\u003eAluminum rear diffuser for the BMW E46 sedan, coupe, and Touring with an M package rear bumper. It is fitted under the bumper and gives the car a racing look, while also making it appear lower. It is an original design, specifically created for this bumper.\u003c\/p\u003e\n\n\u003ch3\u003eTwo ways to mount it\u003c\/h3\u003e\n\u003cp\u003eThe diffuser can be assembled in two different ways, depending on the look you prefer for the rear of the car. You can see both options fitted in the product photos, so you can choose the one you like best before installing it.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made from 3 mm aluminum sheet, a lightweight material that does not rust and withstands the scuffs and minor impacts that the lower part of a bumper can receive. This is important on a lowered E46, where the diffuser sits very close to the ground.\u003c\/p\u003e\n\n\u003ch3\u003eShipped in pieces\u003c\/h3\u003e\n\u003cp\u003eDue to its dimensions, and to prevent damage during transport, it is shipped unassembled so that you can assemble it at home. It includes all the necessary hardware for assembly. The photos show the diffuser before assembly and fitted to various bumpers.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E46 sedan, coupe, and Touring with an M package rear bumper.\u003c\/p\u003e\n\u003cp\u003eIt is not suitable for the standard rear bumper without the M package. We have a specific diffuser for the E36 with M bumpers.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771163644238,"sku":"DGSW.129","price":139.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/0129-bmw-e46-difusor-vista-4.jpg?v=1793092426"},{"product_id":"cinta-de-remolque-roja-con-tornillo-occ-motorsport","title":"Red towing strap with OCC Motorsport bolt","description":"\u003cp\u003eOCC Motorsport tow strap in red, with a bolt to screw into the stock tow hook mount. The thread is 18 x 2.5, which is used on many Japanese cars.\u003c\/p\u003e\u003cp\u003eThe strap is 25 cm long and 3.5 cm wide, and including the bolt, the total length is about 30 cm. According to OCC, it supports up to 3,000 kg. It is mandatory in many competitions and makes it easier to quickly remove the car from the track.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50771182977358,"sku":"DGOCCRC016","price":11.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cinta-remolque-tornillo-occ-rojo_3b7bce39-1144-4b64-8c2c-0b58410fc572.jpg?v=1738580396"},{"product_id":"kit-cierre-capot-muelle-negro-occ-motorsport","title":"OCC Motorsport black spring bonnet latch kit","description":"\u003cp\u003eOCC Motorsport spring bonnet pin kit, in black stainless steel. They replace the standard latch to allow the bonnet to be removed quickly in the paddock, which is very common in rally and circuit cars with fiberglass bonnets.\u003c\/p\u003e\u003cp\u003eStainless steel withstands temperature, corrosion, and impacts well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompetition use.\u003c\/strong\u003e Not road legal.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50771183239502,"sku":"DGOCCRC003","price":11.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cierre-capo-muelle-occ-negro.jpg?v=1738580712"},{"product_id":"cinta-de-remolque-amarilla-occ-motorsport","title":"OCC Motorsport yellow tow strap","description":"\u003cp\u003eOCC Motorsport tow strap in yellow, 25 cm long and 5 cm wide, with a 15 mm bolt hole.\u003c\/p\u003e\u003cp\u003eIt attaches to a sturdy point on the chassis or bumper, providing a visible and easy-to-reach attachment point. It is mandatory in many competitions and also serves for towing the car in case of a breakdown.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50771183468878,"sku":"DGOCCRC014","price":11.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cinta-remolque-occ-amazilla_c8b96509-195c-4823-84ff-23555d812a34.jpg?v=1738580387"},{"product_id":"kit-cierre-capot-aero-negro-occ-motorsport","title":"OCC Motorsport black aero hood latch kit","description":"\u003cp\u003eOCC Motorsport aero-style hood pin kit, in black aluminum, 11 x 7 cm. They sit almost flush with the hood and allow it to be opened and removed in seconds, which is why they are so commonly seen on rally and track cars.\u003c\/p\u003e\u003cp\u003eThe aluminum is lightweight and resistant to heat and impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompetition use only.\u003c\/strong\u003e Not street legal.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50771183665486,"sku":"DGOCCRC006","price":21.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cierrre-capot-rally-aero-occ-negro.jpg?v=1738580707"},{"product_id":"aletas-traseras-bmw-m3-e46-replica-l-r-fibra","title":"M3 replica rear fenders for BMW E46 +1 cm (L+R) fiberglass","description":"\u003cp\u003ePair of fiberglass rear fenders shaped like those of the BMW M3 E46, for the E46 coupé before and after the facelift. They protrude 1 cm more on each side than the stock ones.\u003c\/p\u003e\n\n\u003ch3\u003eThe wide rear of the M3\u003c\/h3\u003e\n\u003cp\u003eThe M3 E46 has a more muscular rear than the rest of the coupés, and that shape is what makes room for wider rear wheels. In drifting, the rear axle is the one that works with the sliding tire, and being able to fit more rubber helps control the car.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eMade from directional fiberglass fabric, a laminate that is lighter and more flexible than matte, which withstands vibrations and small impacts without cracking. The factory finish is a light gray outer layer, unpainted, ready to be lightly sanded and painted or wrapped.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThere is no bolted-on rear fender to replace, because the original is welded to the monocoque. The fiberglass piece is placed on top, the outline is marked, the sheet metal wheel arch is cut, and it is fixed with structural adhesive and rivets. We recommend doing this in a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition product for circuits or closed venues, not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 coupé, before and after the facelift. For the front, you have the \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-m3-e46-replica-l-r-fibra\"\u003eM3-style front fenders\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771225149774,"sku":"DGMK.M3E46.AL-R","price":271.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.M3E46.AL-R-ALETAS-TRASERAS-BMW-M3-E46-REPLICA-LR-FIBRA1.jpg?v=1752135179"},{"product_id":"aletas-delanteras-bmw-m3-e46-gtr-l-r-fibra","title":"GTR front fenders with vents for BMW M3 E46 (L+R) fiberglass","description":"\u003cp\u003ePair of GTR-style fiberglass front fenders for the pre-facelift BMW E46 coupé, with ventilation gills behind the wheel.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the gills for?\u003c\/h3\u003e\n\u003cp\u003eWhen turning, the front wheel pushes air into the wheel arch, which builds up pressure and lift at the front. The gills provide a side exit, helping to vent this air and, at the same time, heat from the brakes. Their shape follows the dimensions of the original fender, so they fit perfectly without cutting or modification.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe laminate is made with fiberglass fabric instead of matting, which makes it lightweight and flexible—very useful in an area that takes a beating during every drifting session. It arrives unfinished, with the outer surface in light grey, ready for preparation and painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey fit in place of the stock fenders. Check the fit with the hood closed and the bumper fitted to ensure the lines match, and leave the painting for later. Installation should be carried out by a body shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part not approved for use on public roads, designed for track use, drifting, and events on closed circuits.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 coupé prior to the facelift. If you prefer the smooth shape of the M3, we also offer \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-m3-e46-replica-l-r-fibra\"\u003eM3-style front fenders\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771226067278,"sku":"DGMK.M3E46.AL-F-GTR","price":367.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK_M3E46_AL-F-GTR-ALETAS-DELANTERAS-BMW-M3-E46-GTR-LR-FIBRA-1.jpg?v=1735810035"},{"product_id":"aletas-delanteras-bmw-m3-e46-replica-l-r-fibra","title":"M3 replica front fenders for BMW E46 (L+R) fiberglass","description":"\u003cp\u003ePair of fiberglass front fenders, left and right, replicating those of the BMW M3 E46. Each weighs around 1.3 kg.\u003c\/p\u003e\n\n\u003ch3\u003eWhy replace the front fenders\u003c\/h3\u003e\n\u003cp\u003eThe M3 fenders are wider than those of a standard E46 and leave room for wheels with more offset and wider tires, something that is appreciated in drifting to gain angle and track. In addition, on a competition car, the front fenders are the first thing to break in a bump, and a fiberglass fender can be replaced for much less money than a sheet metal one.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eMade from directional fiberglass fabric, a laminate that is lighter and more flexible than matting and withstands vibrations and minor impacts without cracking. The factory finish is a light gray outer layer, unpainted, ready to be lightly sanded and painted or wrapped.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are mounted in place of the original fenders. It is recommended to dry fit them, mark the mounting points, and correct any gaps before painting. A body shop will achieve the best result.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition product for track or closed venues, not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 coupe. You also have the \u003ca href=\"\/en\/products\/aletas-traseras-bmw-m3-e46-replica-l-r-fibra\"\u003ematching rear fenders\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771226362190,"sku":"DGMK.M3E46.AL-F","price":247.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/Aletasbmwm3delanteras1.jpg?v=1743699511"},{"product_id":"kit-aletas-delanteras-gtr-con-branquias-y-traseras-bmw-m3-y-e46-coupe-l-r-fibra","title":"GTR front fender kit with gills and rear fenders for BMW M3 and E46 coupé (L+R) fiberglass +1 cm","description":"\u003cp\u003eMade from fiberglass fabric - A material used in bodywork to the highest standard, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND Aesthetics of the components. Their shape is perfectly reproduced AND DOES NOT Present difficulties in assembly AND Combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771226493262,"sku":"DGMK.M3E46.AL-FR-GTR","price":619.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.M3E46.AL-F-GTR-ALETAS-DELANTERAS-BMW-M3-E46-GTR-LR-FIBRA-1.jpg?v=1735810031"},{"product_id":"kit-aletas-delanteras-y-traseras-bmw-m3-e46-repica-l-r-fibra","title":"M3 replica front and rear fender kit for BMW E46 (L+R) fiber +1 cm","description":"\u003cp\u003eMade from fiberglass fabric - A material used in high-end bodywork, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND component aesthetics. Their shape is perfectly reproduced AND presents NO difficulties in assembly AND combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771226689870,"sku":"DGMK.M3E46.AL-FR","price":412.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.M3E46.AL-F-ALETAS-DELANTERAS-BMW-M3-E46-REPLICA-LR-FIBRA-1_7e61c8ef-c525-4aee-b29f-816a0b20b3cd.jpg?v=1735810027"},{"product_id":"maletero-porton-csl-bmw-e46-coupe-y-m3-fibra","title":"CSL-style trunk lid for BMW E46 coupe and M3 - fiber","description":"\u003cp\u003eCSL-style fiberglass trunk lid for the BMW E46 coupé and M3 E46. It replicates the M3 CSL trunk lid, with the small integrated spoiler on the rear edge, and weighs around 3.7 kg.\u003c\/p\u003e\n\n\u003ch3\u003eThe CSL trunk\u003c\/h3\u003e\n\u003cp\u003eThe M3 CSL was the lightweight version of the M3 E46, and one of its hallmarks is the trunk lid with the raised lip at the rear. In addition to its appearance, that shape helps the air detach cleanly from the rear. This replica allows you to give that style to any E46 coupé and, at the same time, remove weight from the rearmost part of the car, which in drifting is the one that is most noticeable in changes of direction and the one that receives the most impacts.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eIt is made with directional fiberglass fabric, lighter and more flexible than mat laminate, so it withstands vibrations and light impacts better. It is delivered unpainted, prepared for light sanding and painting in the color of the car or vinyl wrapping.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt has threads to screw it to the stock hinges. Due to its low weight, the original hydraulic trunk struts cannot be used, as they would lift it with too much force, nor can large and heavy spoilers be mounted on top. It is customary to leave it fixed with \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick pin latches\u003c\/a\u003e. We recommend that the fitment be done by a workshop with experience in bodywork.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part without homologation for driving on public roads, designed for track, drift, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 coupé and M3 E46 coupé. To complete the car you have the \u003ca href=\"\/en\/products\/capo-bmw-m3-e46-coupe-fibra\"\u003eM3 E46 fiberglass hood\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/kit-aletas-delanteras-y-traseras-bmw-m3-e46-repica-l-r-fibra\"\u003eM3 replica fenders for E46\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771226820942,"sku":"DGMK.M3E46.POR-CSL","price":205.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/MALETEROPORTONBMWE46CSL2.jpg?v=1743701373"},{"product_id":"capo-bmw-m3-e46-coupe-fibra","title":"BMW M3 E46 coupe hood - fiber","description":"\u003cp\u003eFiberglass hood for the BMW M3 E46 coupé. It has the profile of the M3 hood, slightly different from a standard E46 coupé, and fits the M3 front fenders. It weighs around 6.1 kg.\u003c\/p\u003e\n\n\u003ch3\u003eA double-sided hood\u003c\/h3\u003e\n\u003cp\u003eIt is made with a double-sided construction, with the inner side also laminated and finished. This gives it considerably more rigidity than a single-layer hood, so it flexes less in high-speed airflow and has a better finish on the inside. For a track-focused M3, it is the closest option to the original with much less weight.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eThe part is laminated with fiberglass fabric instead of matting. This fabric has aligned fibers, so greater strength is achieved with less material, and the hood is lightweight and somewhat flexible. This is what allows it to withstand minor impacts during drifting without cracking easily.\u003c\/p\u003e\n\u003cp\u003eIt is delivered unfinished, with the exterior surface in light gray, prepared for sanding, priming, and painting in the car's color, or for vinyl wrapping. As it is handmade, it is advisable to check the surface during preparation for any small defects.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is fixed to the stock hinges, and it is advisable to complete the installation with pins or quick-release fasteners at the front, so that it does not vibrate or open in high-speed airflow. In the shop you have \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003epin-type quick-release fasteners\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero fasteners\u003c\/a\u003e. If you do not have experience adjusting bodywork, it is better to leave it in the hands of a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part without approval for driving on public roads, intended for track use, drifting, and events on closed circuits.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW M3 E46 coupé. It is also suitable for an E46 coupé that has been fitted with M3 front fenders, such as our \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-m3-e46-replica-l-r-fibra\"\u003efiber M3 replica fenders\u003c\/a\u003e. With air intakes you have the \u003ca href=\"\/en\/products\/capo-bmw-m3-e46-coupe-con-rejillas-fibra\"\u003eM3 GTR style hood\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771227279694,"sku":"DGMK.M3E46.CAP","price":354.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.M3E46.CAPCAPOBMWM3E46COUPE-FIBRA_1.jpg?v=1774380464"},{"product_id":"capo-bmw-m3-e46-coupe-con-rejillas-fibra","title":"GTR-style hood with air intakes BMW M3 E46 coupe - fiber","description":"\u003cp\u003eGTR-style fiberglass hood for the BMW M3 E46 coupé, with air intakes reminiscent of the M3 GTR race car. It is double-sided and weighs between 6 and 7 kg.\u003c\/p\u003e\n\n\u003ch3\u003eRace aesthetics and a little more\u003c\/h3\u003e\n\u003cp\u003eThe GTR look is the main attraction, but the intakes also serve a purpose. The M3's S54 runs very hot under heavy use, and on the track, oil temperatures are often the car's limiting factor. Letting hot air escape through the hood helps keep them in check.\u003c\/p\u003e\n\u003ch3\u003eWhat the air intakes do\u003c\/h3\u003e\n\u003cp\u003eThe openings take advantage of the low pressure formed over the hood at speed to draw air out of the engine bay. This lowers the temperature under the hood and reduces front-axle lift, because the air entering the front finds an exit instead of accumulating underneath.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eIt is laminated with polyester resin reinforced with mat and bidirectional fabric, double-sided for added rigidity. The hinge mountings have M6 threads.\u003c\/p\u003e\n\n\u003ch3\u003eHow it is made\u003c\/h3\u003e\n\u003cp\u003eInstead of the fiberglass mat used in cheap hoods, directional fabric is used—the same type of material used in race body kits. At the same weight, it is stronger, and its flexibility makes it better able to withstand vibrations and light impacts.\u003c\/p\u003e\n\u003cp\u003eThe outer surface comes in unpainted light gray. With some sanding and a coat of primer, it is ready for paint or vinyl. The manufacturing is done by hand, and the surface may need some touch-ups before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt bolts onto the stock hinges. We recommend securing the front with pins or hood latches, because such a lightweight hood can vibrate or lift at high speed if you rely solely on the original latch. You can use \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick-release pin latches\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero latches\u003c\/a\u003e. It is best to leave the fine adjustment of gaps to a body shop or tuning shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eIt is not approved for use on public roads. It is a part for track use, drifting, rallycross, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW M3 E46 coupé. It also fits an E46 coupé with M3 front fenders. Without the air intakes, you have the \u003ca href=\"\/en\/products\/capo-bmw-m3-e46-coupe-fibra\"\u003efiberglass M3 E46 hood\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771227672910,"sku":"DGMK.M3E46.CAP-REJ","price":437.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/CAPOBMWE46REJILLAS1.jpg?v=1743700359"},{"product_id":"kit-aletas-delanteras-y-traseras-bmw-e36-coupe-tipo-felony-l-r-fibra","title":"BMW E36 coupé Felony-style front and rear fender kit (L+R) fiberglass","description":"\u003cp\u003eComplete set of Felony-style widebody panels for the BMW E36 coupé, with two front and two rear panels in fiberglass. Each panel flares out 4 cm further than the stock one.\u003c\/p\u003e\n\n\u003ch3\u003eMore track width for the E36 drift car\u003c\/h3\u003e\n\u003cp\u003eWith an extra 4 cm on each side, you can fit wheels with less offset or wider tires, providing more track width and greater stability when the car is sideways. Buying the complete set ensures that the front and rear have the same line, which is difficult to achieve by mixing parts from different manufacturers.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eDirectional-weave fiberglass withstands impacts better than traditional laminates and is very lightweight. The exterior finish is light gray, unpainted, and only requires light sanding before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey replace the sheet metal panels. Before painting, it is advisable to fit them to the car and adjust the gaps with the hood, bumper, and door, as every bodywork has its small differences. We recommend that the installation be carried out by a body shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eNot approved for use on public roads. Product for track use, drifting, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 coupé. If you only need the front end, you have the \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-e36-coupe-tipo-felony-l-r-fibra\"\u003eE36 coupé Felony front widebody panels\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771228295502,"sku":"DGMK.E36COU.AL-FR-FELONY","price":238.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COU.AL-FR-FELONY-KIT-ALETAS-DELANTERAS-Y-TRASERAS-BMW-E36-COUPE-TIPO-FELONY-LR-FIBRA1.jpg?v=1735810016"},{"product_id":"kit-aletas-delanteras-y-traseras-bmw-e36-compact-tipo-felony-l-r-fibra","title":"BMW E36 compact Felony style front and rear fender kit (L+R) fiberglass","description":"\u003cp\u003eSet of two Felony-style front and two rear widebody panels for the BMW E36 compact, all made of fiberglass and 4 cm wider on each side than the stock panels.\u003c\/p\u003e\n\n\u003ch3\u003eThe compact, widened from end to end\u003c\/h3\u003e\n\u003cp\u003eThe E36 compact is short and light, an ideal base for drifting, but its wheel arches severely limit wheel sizes. This kit adds 4 cm on each side to both axles, allowing for wider wheels with lower offsets while maintaining the car's balanced lines.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eMade from directional fiberglass fabric, a laminate that is lighter and more flexible than matting and withstands vibrations and minor impacts without cracking. The factory finish is a light gray outer layer, unpainted, ready to be lightly sanded and painted or wrapped.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are fitted in place of the original panels. It is recommended to dry-fit them, mark the mounting points, and correct any gaps before painting. A body shop will achieve the best results.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition product for track or closed-circuit use, not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 compact. If you only need the front, you can get the \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-e36-compact-tipo-felony-l-r-fibra\"\u003eFelony E36 compact front widebody panels\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771228459342,"sku":"DGMK.E36COM.AL-FR-FELONY","price":238.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COM.AL-FR-FELONY-KIT-ALETAS-DELANTERAS-Y-TRASERAS-BMW-E36-COMPACT-TIPO-FELONY-LR-FIBRA-1.jpg?v=1735810015"},{"product_id":"aletas-delanteras-bmw-e36-coupe-tipo-felony-l-r-fibra","title":"BMW E36 coupé Felony-style front fenders (L+R) fiberglass","description":"\u003cp\u003eFiberglass Felony-style front fenders for the BMW E36 coupé, left and right, with a 4 cm wider track compared to the originals.\u003c\/p\u003e\n\n\u003ch3\u003eA wider and lighter front end\u003c\/h3\u003e\n\u003cp\u003eThe coupé is the E36 version most commonly used in drifting, and widening the front is one of the first modifications made to accommodate wider wheels. These fenders allow this without altering the car's overall appearance, and they reduce front-end weight.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eMade from directional fiberglass fabric, a laminate that is lighter and more flexible than mat-finish fiberglass and withstands vibrations and minor impacts without cracking. The factory finish is a light gray outer layer, unpainted, ready to be lightly sanded and painted or wrapped.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey are mounted in place of the original fenders. It is recommended to dry-fit them, mark the mounting points, and correct any gaps before painting. A body shop will achieve the best results.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition product for track or closed-circuit use, not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 coupé. To complete both axles, you will need the \u003ca href=\"\/en\/products\/kit-aletas-delanteras-y-traseras-bmw-e36-coupe-tipo-felony-l-r-fibra\"\u003efull Felony E36 coupé kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and throughout Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771228623182,"sku":"DGMK.E36COU.AL-F-FELONY","price":140.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COU.AL-F-FELONY-ALETAS-DELANTERAS-BMW-E36-COUPE-TIPO-FELONY-LR-FIBRA-1.jpg?v=1735810014"},{"product_id":"aletas-traseras-bmw-e36-coupe-tipo-felony-l-r-fibra","title":"BMW E36 coupé Felony style rear fenders (L+R) fiberglass","description":"\u003cp\u003eFelony-style fiberglass rear fenders for the BMW E36 coupé, left and right, with 4 cm of widening on each side.\u003c\/p\u003e\n\n\u003ch3\u003eThe axle that works the hardest in drifting\u003c\/h3\u003e\n\u003cp\u003eThe rear is where the tire wears out and slides, so it is where you benefit most from fitting a wider wheel. These fenders add 4 cm on each side while maintaining a clean line with the rest of the coupé.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eDirectional-weave fiberglass withstands impacts better than traditional laminate and is very lightweight. The exterior finish is light gray, unpainted, and only requires light sanding before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe rear fenders of a BMW are part of the welded bodywork, so these parts are mounted over the original fender. The usual method is to cut the wheel arch sheet metal and secure the fiberglass with body adhesive, rivets, or screws. This is a body shop job.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eNot approved for use on public roads. Product for track use, drifting, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 coupé. For the front, you have the \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-e36-coupe-tipo-felony-l-r-fibra\"\u003eFelony E36 coupé front fenders\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771228819790,"sku":"DGMK.E36COU.AL-R-FELONY","price":147.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COU.AL-R-FELONY-ALETAS-TRASERAS-BMW-E36-COUPE-TIPO-FELONY-LR-FIBRA-1.jpg?v=1735810013"},{"product_id":"aletas-delanteras-bmw-e36-compact-tipo-felony-l-r-fibra","title":"BMW E36 Compact Felony-style front fenders (L+R) fiberglass","description":"\u003cp\u003ePair of Felony-style fiberglass front fenders for the BMW E36 compact, with 4 cm of widening on each side.\u003c\/p\u003e\n\n\u003ch3\u003eWidening only the front\u003c\/h3\u003e\n\u003cp\u003eSome people start by widening only the front axle, which is where track width is most noticeable in drifting and where most impacts are received. These fenders accommodate a wider wheel in the front and reduce the weight of the front end compared to steel fenders.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eDirectional-weave fiberglass withstands impacts better than traditional laminates and is very lightweight. The exterior finish is light gray, unpainted, and only requires light sanding before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey replace the steel fenders. Before painting, it is advisable to fit them to the car and adjust the gaps with the hood, bumper, and door, as every bodywork has its small differences. We recommend that the installation be carried out by a body shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eNot approved for use on public roads. Product for track use, drifting, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 compact. To do both axles, you have the \u003ca href=\"\/en\/products\/kit-aletas-delanteras-y-traseras-bmw-e36-compact-tipo-felony-l-r-fibra\"\u003ecomplete Felony E36 compact kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771229016398,"sku":"DGMK.E36COM.AL-F-FELONY","price":140.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COM.AL-F-FELONY-ALETAS-DELANTERAS-BMW-E36-COMPACT-TIPO-FELONY-LR-FIBRA-1.jpg?v=1735810012"},{"product_id":"aletas-traseras-bmw-e36-compact-tipo-felony-l-r-fibra","title":"BMW E36 Compact Felony style rear fenders (L+R) fiberglass","description":"\u003cp\u003ePair of Felony-style fiberglass rear flares for the BMW E36 compact, with 4 cm of widening on each side.\u003c\/p\u003e\n\n\u003ch3\u003eMore rubber at the back\u003c\/h3\u003e\n\u003cp\u003eIn a drift compact, the rear wheel determines how much grip is left when sideways. With 4 cm more flare, wider tires or wheels with less offset can fit, and the rear track widens, making the car more stable during transitions.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe layup is made with fiberglass cloth instead of matting, which accounts for its low weight and flexibility, very useful in an area that takes hits in every drift session. It comes raw, with the outer face in light gray, ready to be primed and painted.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is placed over the stock rear fender, which is welded to the bodywork. To gain clearance, the original wheel arch must be cut and the fiberglass joined with body adhesive and rivets or screws. It is advisable to have the final wheels on hand to check the measurements before cutting.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part without approval for driving on public roads, designed for track use, drifting, and events in closed venues.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 compact. For the front, you have the \u003ca href=\"\/en\/products\/aletas-delanteras-bmw-e36-compact-tipo-felony-l-r-fibra\"\u003eFelony E36 compact front flares\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771229180238,"sku":"DGMK.E36COM.AL-R-FELONY","price":147.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK_E36COM_AL-R-FELONY-ALETAS-TRASERAS-BMW-E36-COMPACT-TIPO-FELONY-LR-FIBRA-1.jpg?v=1735810011"},{"product_id":"aletas-delanteras-bmw-e36-touring-sedan-tipo-felony-l-r-fibra","title":"BMW E36 touring\/sedan Felony style front fenders (L+R) fiberglass","description":"\u003cp\u003ePair of Felony-style fiberglass front fenders for the BMW E36 sedan and touring. They stick out 4 cm further than the originals on each side.\u003c\/p\u003e\n\n\u003ch3\u003eMore room for wheels up front\u003c\/h3\u003e\n\u003cp\u003eIn drifting, the front axle benefits most from a wider track, as it provides stability when the steering wheel is turned to full lock. These fenders leave room for wheels with lower offsets or wider tires, and replace the stock metal fenders with much less weight over the front end.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThey are made using fiberglass cloth instead of matting, which makes them lightweight and flexible—very useful in an area that takes hits in every drifting session. They arrive unfinished, with the outer surface in light gray, ready to be primed and painted.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThey fit in the same position as the stock fenders. Check the fit with the hood closed and the bumper fitted to ensure the lines match, and leave the painting for later. Installation should be carried out by a body shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part not approved for use on public roads, designed for track use, drifting, and events on closed circuits.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 sedan and touring.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771230654798,"sku":"DGMK.E36SED.AL-F-FELONY","price":140.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COM.AL-F-FELONY-ALETAS-DELANTERAS-BMW-E36-COMPACT-TIPO-FELONY-LR-FIBRA-1_63e2406c-ecd8-4479-87c3-19a8fd21c9aa.jpg?v=1735810009"},{"product_id":"capo-bmw-e46-compact-fibra","title":"BMW E46 compact hood - fiberglass","description":"\u003cp\u003eFiberglass hood for the BMW E46 compact. The compact has its own front end, with headlights and a hood different from the rest of the E46, and therefore uses a specific hood. It weighs about 6.5 kg.\u003c\/p\u003e\n\n\u003ch3\u003eThe compact as a competition car\u003c\/h3\u003e\n\u003cp\u003eThe E46 compact is short, rear-wheel drive, and can be found at a good price, so it is seen more and more in drifting and rallycross. Its front end cannot be swapped for that of other E46s, and stock hoods in good condition are not common. A fiberglass one solves both problems, because it reduces weight and is easy to replace.\u003c\/p\u003e\n\n\u003ch3\u003eHow it is made\u003c\/h3\u003e\n\u003cp\u003eInstead of the fiberglass mat used in cheap hoods, directional fabric is used, the same type of material used in competition body kits. At the same weight, it is stronger, and its flexibility makes it better able to withstand vibrations and light impacts.\u003c\/p\u003e\n\u003cp\u003eThe exterior surface comes in unpainted light gray. With some sanding and a coat of primer, it is ready for paint or vinyl. The manufacturing is manual and the surface may need some touch-ups before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt screws into the stock hinges. We recommend securing the front with pins or hood latches, because such a light hood can vibrate or lift at high speed if you only rely on the original lock. You have \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick pin-type latches\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero latches\u003c\/a\u003e. It is best to leave the fine adjustment of the gaps to a body shop or preparation shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eIt is not approved for use on public roads. It is a part for track use, drifting, rallycross, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 compact. With air intakes, you have the \u003ca href=\"\/en\/products\/capo-bmw-e46-compact-con-rejillas-fibra\"\u003evented hood for the E46 compact\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231048014,"sku":"DGMK.E46COM.CAP","price":296.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E46COM.CAP_02.jpg?v=1793875262"},{"product_id":"capo-bmw-e46-sedan-berlina-restyling-fibra","title":"BMW E46 sedan hood (facelift from 2001) - fiber","description":"\u003cp\u003eFiberglass hood for the BMW E46 sedan restyling, manufactured from 2001. With the restyling, the headlights and the shape of the hood changed, which is why it has its own version.\u003c\/p\u003e\n\n\u003ch3\u003eWeight saving where it matters most\u003c\/h3\u003e\n\u003cp\u003eRemoving weight from the hood is one of the most cost-effective improvements in a track car. It is at the front and high up, so the weight removed there improves both the axle distribution and the height of the center of gravity. In an E46 sedan, which weighs quite a bit, the change is noticeable when entering corners.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eThe part is laminated with fiberglass fabric instead of mat. That fabric has aligned fibers, so with less material you get more strength, and the hood is light and somewhat flexible. This is what allows it to withstand the small bumps of drifting without cracking easily.\u003c\/p\u003e\n\u003cp\u003eIt is delivered raw, with the exterior surface in light gray, prepared for sanding, priming, and painting the color of the car or for vinyl wrapping. Since it is a manual manufacturing process, it is advisable to check the surface during preparation for any small defects.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is fixed to the stock hinges and it is advisable to complete the assembly with pins or quick releases at the front, so that it does not vibrate or open with the air at high speed. In the store you have \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003epin-type quick releases\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero releases\u003c\/a\u003e. If you do not have experience adjusting bodywork, it is better to leave it in the hands of a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part without homologation for driving on public roads, intended for track, drift, and events in closed venues.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 sedan restyling, from 2001. It does not fit the earlier models, which have the \u003ca href=\"\/en\/products\/capo-bmw-e46-sedan-berlina-no-restyling-fibra\"\u003enon-restyling fiberglass hood\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231146318,"sku":"DGMK.E46SED.CAP-RESTYLING","price":276.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/Capofibrae46berlinarestyling1.jpg?v=1752144628"},{"product_id":"capo-bmw-e46-sedan-berlina-no-restyling-fibra","title":"BMW E46 sedan and touring hood (pre-facelift) - fiberglass","description":"\u003cp\u003eFiberglass hood for the pre-facelift BMW E46 sedan, from 1998 to 2001. It is also suitable for the 1999 to 2001 E46 touring, which shares the same front end. It weighs around 6.1 kg.\u003c\/p\u003e\n\n\u003ch3\u003eA hood for competition sedans\u003c\/h3\u003e\n\u003cp\u003eThe E46 sedan is an increasingly popular base for drifting and circuit racing because it is affordable and shares the same mechanical components as the coupé. The steel hood weighs a lot compared to what it offers in a competition car. With a fiberglass one, the front end becomes more agile, and any impact to the front is cheaper to repair.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made with directional fiberglass fabric, which is lighter and stronger than classic mat laminate. The fibers are oriented according to the stresses on the part, giving it flexibility. In the event of a light impact, it tends to flex and return to its shape instead of breaking, and any damage can be repaired with resin without the need for a body shop.\u003c\/p\u003e\n\u003cp\u003eIt comes unpainted, with the outer layer in light gray. A light sanding is all that is needed to paint or vinyl it. As each unit is handmade, there may be small surface irregularities that disappear when preparing the paint.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is mounted on the car's original hinges. For circuit use, it is best to secure the front with pins, as at high speeds, the wind tends to cause a lightweight hood to flex, and the factory lock is not always sufficient. You can use our \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick pin-type latches\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero latches\u003c\/a\u003e. We recommend that it be installed and fitted by an experienced workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eProduct designed for competition and use on circuits or closed courses. It is not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46 sedan from 1998 to 2001 and touring from 1999 to 2001. It is not suitable for the E46 facelift, which has its own \u003ca href=\"\/en\/products\/capo-bmw-e46-sedan-berlina-restyling-fibra\"\u003efacelift fiberglass hood\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231310158,"sku":"DGMK.E46SED.CAP-NORESTYLING","price":276.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/capoe46berlinanorestyling1.png?v=1747212232"},{"product_id":"rejilla-capo-universal-v1-fibra","title":"Universal hood vent V1 - fiber","description":"\u003cp\u003eMade from fiberglass fabric - A material used in bodywork to the highest standard, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND Aesthetics of the components. Their shape is perfectly reproduced AND DOES NOT Present difficulties in assembly AND Combination with other bodywork elements\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231342926,"sku":"DGMK.UNI.REJCAP-V1","price":131.41,"currency_code":"EUR","in_stock":true}]},{"product_id":"rejillas-capo-e46-v1-fibra","title":"E46 V1 hood vents - fiberglass","description":"\u003cp\u003eMade from fiberglass fabric - A material used in bodywork to the highest standards, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND component aesthetics. Their shape is perfectly reproduced AND presents NO difficulties in assembly AND combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231441230,"sku":"DGMK.E46.REJCAP-V1","price":78.52,"currency_code":"EUR","in_stock":true}]},{"product_id":"rejilla-capo-universal-v2-fibra","title":"Universal hood vent V2 - fiber","description":"\u003cp\u003eMade from fiberglass fabric - A material used in high-end bodywork, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND component aesthetics. Their shape is perfectly reproduced AND presents NO difficulties in assembly AND combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231506766,"sku":"DGMK.UNI.REJCAP-V2","price":90.09,"currency_code":"EUR","in_stock":true}]},{"product_id":"rejilla-capo-universal-v3-fibra","title":"Universal hood vent V3 - fiber","description":"\u003cp\u003eMade from fiberglass fabric - A material used in high-end bodywork, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND component aesthetics. Their shape is perfectly reproduced AND presents NO difficulties in assembly AND combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231572302,"sku":"DGMK.UNI.REJCAP-V3","price":61.99,"currency_code":"EUR","in_stock":true}]},{"product_id":"capo-bmw-e36-compact-sedan-touring-fibra","title":"BMW E36 Compact, Sedan and Touring Hood - Fiber","description":"\u003cp\u003eFiberglass hood for the BMW E36 Compact, sedan, and Touring. It replicates the shape of the stock hood for these body styles, which is different from the coupe's, and weighs between 5.5 and 6 kg depending on the version.\u003c\/p\u003e\n\n\u003ch3\u003eA lighter E36\u003c\/h3\u003e\n\u003cp\u003eThe Compact and sedan have become affordable bases for getting into drifting, and weight reduction is almost always a priority. The hood is one of the first parts to be replaced because it is at the very front of the car, and its weight affects how the front end handles in corners. A fiberglass hood is also easy to repair or replace after a collision.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eThe part is laminated with fiberglass fabric instead of matting. This fabric has aligned fibers, so it achieves greater strength with less material, making the hood lightweight and slightly flexible. This allows it to withstand minor impacts during drifting without cracking easily.\u003c\/p\u003e\n\u003cp\u003eIt is delivered unfinished, with the exterior surface in light gray, prepared for sanding, priming, and painting to match the car's color, or for vinyl wrapping. Since it is handmade, it is advisable to check the surface during preparation for any minor defects.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is mounted on the stock hinges, and it is advisable to complete the installation with pins or quick-release fasteners at the front to prevent vibration or opening due to high-speed airflow. In the shop, you can find \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003epin-type quick-release fasteners\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero fasteners\u003c\/a\u003e. If you have no experience fitting bodywork, it is best to leave it to a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part not approved for use on public roads, intended for track use, drifting, and events on closed circuits.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 Compact, sedan, and Touring. It is not suitable for the E36 coupe, which has its own \u003ca href=\"\/en\/products\/capo-bmw-e36-coupe-fibra\"\u003efiberglass hood\u003c\/a\u003e. For models with air intakes, you can choose the \u003ca href=\"\/en\/products\/capo-con-rejilla-bmw-e36-compact-sedan-touring-fibra\"\u003evented hood for these body styles\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231670606,"sku":"DGMK.E36SED.CAP","price":247.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36SED.CAP_01.jpg?v=1793875263"},{"product_id":"capo-bmw-e36-coupe-fibra","title":"BMW E36 coupe hood - fiberglass","description":"\u003cp\u003eFiberglass hood for the BMW E36 coupé, with the exact shape of the original and without air intakes. It weighs around 5.5 kg, a fraction of what the sheet metal hood weighs, and is the simplest way to remove weight from the front end of a drift or track E36.\u003c\/p\u003e\n\n\u003ch3\u003eWhy change the hood of an E36\u003c\/h3\u003e\n\u003cp\u003eThe E36 coupé is one of the most used drift bases, and it is normal for it to accumulate dents on the front end. An original hood in good condition is becoming scarce and costs more than it seems to repair. With a fiberglass one, you save many kilos in the most forward area of the car, the front end responds better when turning, and, if it gets hit, the repair is much cheaper.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eIt is made with directional fiberglass fabric, lighter and stronger than the classic mat laminate. The fibers are oriented following the stresses of the part, which gives it flexibility. In the event of a light hit, it tends to give and recover its shape instead of breaking, and any damage is repaired with resin without the need for a body shop.\u003c\/p\u003e\n\u003cp\u003eIt comes unpainted, with the outer layer in light gray. A light sanding is enough to paint or vinyl it. Since each unit is handmade, there may be small surface irregularities that disappear when preparing the paint.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt goes on the car's original hinges. For the track, the correct thing is to secure the front part with pins, since with the wind at high speed a light hood tends to flex and the stock lock is not always enough. You can use our \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick pin-type locks\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero locks\u003c\/a\u003e. We recommend that an experienced workshop mounts and adjusts it.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eProduct designed for competition and use on the track or in closed facilities. It is not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 coupé. If you want the engine to breathe better, you also have the \u003ca href=\"\/en\/products\/capo-con-rejilla-bmw-e36-coupe-fibra\"\u003ehood with air intakes for the E36 coupé\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231801678,"sku":"DGMK.E36COU.CAP","price":247.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/DGMK.E36COU.CAP_01.jpg?v=1793875263"},{"product_id":"capo-con-rejilla-bmw-e36-compact-sedan-touring-fibra","title":"Hood with air intake for BMW E36 Compact, Sedan and Touring - fiber","description":"\u003cp\u003eFiberglass hood with air scoop for the BMW E36 Compact, sedan, and Touring. It weighs around 5.4 kg and replaces the sheet metal hood with an outlet for hot engine air.\u003c\/p\u003e\n\n\u003ch3\u003eHeat under the hood\u003c\/h3\u003e\n\u003cp\u003eMany Compacts and drift sedans have swapped in six-cylinder engines, such as the M50 or M52, into an engine bay designed for smaller engines. Space is tight and heat builds up. A hood scoop lets that air escape and helps keep water temperatures in check during long runs.\u003c\/p\u003e\n\u003ch3\u003eHow air scoops work\u003c\/h3\u003e\n\u003cp\u003eThe scoop is located on the part of the hood where the air passing over it creates a small low-pressure area. This allows the hot air from the engine bay to flow out naturally, without fans, and makes room for fresh air entering through the front.\u003c\/p\u003e\n\n\u003ch3\u003eHow it is made\u003c\/h3\u003e\n\u003cp\u003eInstead of the fiberglass mat used in cheap hoods, directional fabric is used, the same type of material used in competition body kits. At the same weight, it is stronger, and its flexibility makes it better able to withstand vibrations and light impacts.\u003c\/p\u003e\n\u003cp\u003eThe exterior surface comes in unpainted light gray. With some sanding and a coat of primer, it is ready for paint or vinyl. The manufacturing is done by hand and the surface may need some touch-ups before painting.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt bolts onto the stock hinges. We recommend securing the front with pins or hood latches, because such a lightweight hood can vibrate or lift at high speed if you only rely on the original lock. You have \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003equick pin-style latches\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero latches\u003c\/a\u003e. It is best to leave the fine adjustment of gaps to a body shop or preparation shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eIt is not approved for use on public roads. It is a part for track use, drifting, rallycross, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 Compact, sedan, and Touring. It is not suitable for the coupe. You also have the \u003ca href=\"\/en\/products\/capo-bmw-e36-compact-sedan-touring-fibra\"\u003eflat hood for these body styles\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231899982,"sku":"DGMK.E36SED.CAP-REJ","price":304.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/CAPOBMWE36CONREJILLAS1.1.jpg?v=1743700822"},{"product_id":"capo-con-rejilla-bmw-e36-coupe-fibra","title":"Hood with air intakes BMW E36 coupe - fiber","description":"\u003cp\u003eFiberglass hood for the BMW E36 coupé with air vents integrated into the surface. It weighs around 5.8 kg and combines the weight savings of a fiberglass hood with an outlet for hot air from the engine bay.\u003c\/p\u003e\n\n\u003ch3\u003eLightness and temperature\u003c\/h3\u003e\n\u003cp\u003eIn drifting, the car spends a lot of time sideways, at low speed and with the engine at high revs, exactly the situation in which the least air enters the radiator. The temperature of the engine bay rises and with it the water and oil temperatures. The vents let that hot air escape through the top and help the radiator work better.\u003c\/p\u003e\n\u003ch3\u003eWhat the air vents are for\u003c\/h3\u003e\n\u003cp\u003eThe openings are placed in the area of the hood where the airflow creates a vacuum as it circulates, so the hot air comes out on its own. In addition to lowering the temperature under the hood, this reduces the pressure that builds up inside the engine bay and tends to lift the front end at high speed.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eThe part is laminated with fiberglass fabric instead of mat. This fabric has aligned fibers, so with less material, greater strength is achieved, and the hood is lightweight and somewhat flexible. This is what allows it to withstand the small impacts of drifting without cracking easily.\u003c\/p\u003e\n\u003cp\u003eIt is delivered raw, with the exterior surface in light gray, prepared for sanding, priming, and painting the color of the car or for vinyl wrapping. Since it is a handmade product, it is advisable to check the surface during preparation for any small defects.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt is fixed to the stock hinges and it is advisable to complete the assembly with pins or quick releases at the front, so that it does not vibrate or open with the air at high speed. In the store you have \u003ca href=\"\/en\/products\/cierre-capo-y-maletero-universal-v1\"\u003epin-type quick releases\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kit-cierre-capot-aero-negro-occ-motorsport\"\u003eOCC Motorsport aero releases\u003c\/a\u003e. If you do not have experience adjusting bodywork, it is better to leave it in the hands of a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition part without homologation for driving on public roads, intended for track, drift, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E36 coupé. You also have the \u003ca href=\"\/en\/products\/capo-bmw-e36-coupe-fibra\"\u003esmooth hood for E36 coupé\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771231965518,"sku":"DGMK.E36COU.CAP-REJ","price":304.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/CAPOBMWE36CONREJILLAS5.jpg?v=1743700850"},{"product_id":"lip-bmw-e46-pack-m-v1-fibra","title":"BMW E46 M Pack V1 Front Lip - fiberglass","description":"\u003cp\u003eMade from fiberglass fabric - A material used in top-tier bodywork, with very low weight AND at the same time very high flexibility, strength AND DURABILITY. By using directional fabrics, these products are lighter, more durable, stronger AND more flexible compared to traditional laminates. Very high precision AND component aesthetics. Their shape is perfectly reproduced AND presents NO difficulties in assembly AND combination with other bodywork elements.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771232063822,"sku":"DGMK.E46PACKM.LIP-V1","price":119.84,"currency_code":"EUR","in_stock":true}]},{"product_id":"kit-cierre-capot-aero-llave-negro-occ-motorsport-2","title":"OCC Motorsport black keyed aero hood latch kit","description":"\u003cp\u003eOCC Motorsport aero-style hood pin kit, made of black aluminum, 11 x 7 cm. This version includes a key lock. They sit nearly flush with the hood and allow it to be opened and removed in seconds, which is why they are so commonly seen on rally and track cars.\u003c\/p\u003e\u003cp\u003eThe aluminum is lightweight and resistant to heat and impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompetition use.\u003c\/strong\u003e Not street legal.\u003c\/p\u003e","brand":"OCC","offers":[{"title":"Default Title","offer_id":50772887994702,"sku":"DGOCCRC007","price":25.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/cierrre-capo-aero-llave-occ-negro-llave.jpg?v=1738580702"},{"product_id":"sunroof-cover-for-bmw-e30","title":"CNC71 BMW E30 Polycarbonate Sunroof Panel","description":"\u003cp\u003eCNC71 sunroof roof panel for the BMW E30, made from blue polycarbonate. It closes the sunroof opening and replaces the entire original assembly, which is much heavier.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer estimates a weight saving of around 15 kg, which is also removed from the highest point of the car. The blue tint filters some sunlight and reduces the heat entering the cabin. It is a common first step in lightening a drift E30.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E30\u003c\/li\u003e\n\n\u003cli\u003eBlue polycarbonate\u003c\/li\u003e\n\n\u003cli\u003e920 x 550 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight saving of around 15 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CNC71","offers":[{"title":"Default Title","offer_id":50986749952334,"sku":"CNC71-K-P-S-E30","price":64.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/54.jpg?v=1738248478"},{"product_id":"cubierta-de-techo-solar-para-bmw-e36","title":"CNC71 BMW E36 Polycarbonate Sunroof Delete Panel","description":"\u003cp\u003eCNC71 clear polycarbonate sunroof panel for the BMW E36. Replaces the factory sunroof with a lightweight panel that seals the roof opening.\u003c\/p\u003e\n\u003cp\u003eIt eliminates the glass, rails, and sunroof motor, for a total weight saving of approximately 15 kg according to the manufacturer. In a drift E36, it is an affordable way to start reducing weight, and it also eliminates a common source of leaks and noise over time.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E36\u003c\/li\u003e\n\n\u003cli\u003eClear polycarbonate\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 920 x 550 mm\u003c\/li\u003e\n\n\u003cli\u003eSaves approximately 15 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CNC71","offers":[{"title":"Default Title","offer_id":50986792976718,"sku":"CNC71-K-P-S-E36","price":64.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/3458.jpg?v=1738248751"},{"product_id":"cubierta-de-techo-solar-para-bmw-e46","title":"CNC71 BMW E46 Polycarbonate Sunroof Delete Panel","description":"\u003cp\u003eCNC71 polycarbonate panel that replaces the sunroof in the BMW E46. You remove the original glass with its entire mechanism and close the roof with this transparent cover.\u003c\/p\u003e\n\u003cp\u003eThe sunroof assembly is quite heavy and is at the highest point of the bodywork, which is why removing it makes a difference in the center of gravity. CNC71 calculates about 15 kg less. It is a typical upgrade in E46 cars prepared for drifting or track use.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E46\u003c\/li\u003e\n\n\u003cli\u003eTransparent polycarbonate\u003c\/li\u003e\n\n\u003cli\u003e920 x 550 mm\u003c\/li\u003e\n\n\u003cli\u003eAbout 15 kg less weight\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CNC71","offers":[{"title":"Default Title","offer_id":50986794058062,"sku":"CNC71-K-P-S-E46","price":64.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/3460.jpg?v=1738248757"},{"product_id":"cubierta-de-techo-solar-para-bmw-e92","title":"BMW E92 CNC71 polycarbonate sunroof panel","description":"\u003cp\u003eCNC71 clear polycarbonate panel to close the sunroof opening of the BMW E92. It replaces the entire sunroof assembly, including the glass, mechanism, and motor, with a single lightweight piece.\u003c\/p\u003e\n\u003cp\u003eAccording to CNC71, removing the sunroof saves approximately 15 kg, and does so at the highest point of the car. For a drift or track car, it is one of the first steps to reduce weight. Being transparent, it still allows light into the cabin.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 3 Series E92\u003c\/li\u003e\n\n\u003cli\u003eClear polycarbonate\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 920 x 550 mm\u003c\/li\u003e\n\n\u003cli\u003eApproximate weight saving: 15 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CNC71","offers":[{"title":"Default Title","offer_id":50986794778958,"sku":"CNC71-K-P-S-E92","price":64.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/3462.jpg?v=1738248762"},{"product_id":"lip-delantero-para-bmw-e46-abs","title":"Front lip for BMW E46 ABS","description":"\u003cp\u003eMade of high-quality ABS.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation on the front bumper of the BMW E46 M PACK.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":52654406205774,"sku":"DG.LIP46001","price":139.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/LIPBMWE46.jpg?v=1743701812"},{"product_id":"paragolpes-delantero-tipo-m3-e30-para-berlina-coupe-cabrio","title":"M3 E30 style front bumper for sedan\/coupe\/convertible","description":"\u003cp\u003eFiberglass front bumper shaped like the one on the BMW M3 E30, for installation on sedan, coupé, convertible, and touring versions.\u003c\/p\u003e\n\n\u003ch3\u003eThe M3 front end\u003c\/h3\u003e\n\u003cp\u003eThe M3 E30 bumper is deeper than the stock one, with a pronounced lower lip and brake cooling ducts. It is the part that changes the face of the car the most, and the originals are expensive and difficult to find. In fiberglass, it weighs much less than the stock one, with its structure and its absorber, and if it gets damaged in a minor collision, it can be replaced without spending much.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and finish\u003c\/h3\u003e\n\u003cp\u003eMade from directional fiberglass fabric, a laminate that is lighter and more flexible than matte, and that withstands scuffs and minor bumps better. It is delivered unpainted, with the outer layer in light gray, ready to be lightly sanded and painted or wrapped.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eDry fit it, mark the mounting points, and correct any gaps before painting it. Depending on the car, it may require minor adjustments. It is best to leave the work to a workshop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eCompetition product for track or closed-circuit use, not approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E30 sedan, coupé, convertible, and touring.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":52654591869262,"sku":"DGMK.M3E30ST","price":164.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/PARAGOLPESDELANTEROM3E301.jpg?v=1743703862"},{"product_id":"kit-de-aletas-bmw-m3-e92-replica","title":"BMW M3 E92 replica body kit","description":"\u003cp data-start=\"81\" data-end=\"117\" class=\"\"\u003e\u003cstrong data-start=\"81\" data-end=\"117\"\u003eBMW M3 E92 Replica Fender Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"119\" data-end=\"444\" class=\"\"\u003eHigh-quality fiberglass front fender kit, designed as a replica of the M3 E92 model. Thanks to the use of directional fabrics in their construction, these parts stand out for their lightness, structural strength, and flexibility, far exceeding the performance of conventional laminates.\u003c\/p\u003e\n\u003cp data-start=\"446\" data-end=\"693\" class=\"\"\u003eThe manufacturing process guarantees high dimensional precision and a meticulous aesthetic finish. Despite their tight fit, installation may require modifications and adaptations to the vehicle, depending on its specific configuration.\u003c\/p\u003e\n\u003cp data-start=\"695\" data-end=\"818\" class=\"\"\u003eThe fenders are delivered unpainted, with a layer of white primer, ready for the application of the final finish.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eDespite their tight fit, installation may require modifications and adaptations to the vehicle , depending on its specific configuration.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":52654646853966,"sku":"DGMK.M3E92KIT","price":569.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/ALETASDELANTERASM3E921.jpg?v=1743704848"},{"product_id":"aleron-m3-e30-fibra","title":"E30 M3 fiber spoiler","description":"\u003cp\u003eFiberglass rear wing for the BMW E30 M3, with the high wing shape that the standard M3 had. It is also suitable for E30s fitted with M3+8 and M3+14 bodywork.\u003c\/p\u003e\n\n\u003ch3\u003eThe most recognizable E30 wing\u003c\/h3\u003e\n\u003cp\u003eThe M3 E30 wing was created for Group A, where BMW needed more rear support, which is why it is higher and sits further away from the boot lid than that of a standard E30. Today, it is almost essential on any E30 with an M3 look. An original in good condition is expensive and hard to find, and this fiberglass replica offers the same look with very little weight.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eThe directional-weave fiberglass it is made from withstands impacts better than traditional laminate and is very lightweight. It comes unpainted in light gray and only needs a light sanding before the final finish.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBefore fixing it, it is advisable to position it on the boot lid and check the fit, as each body has its own slight differences. It is usually attached using body adhesive, screws, or a combination of both. We recommend that it be installed and painted by a body shop.\u003c\/p\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eIt is not approved for use on public roads. It is a part for track use, drifting, and closed-circuit events.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW E30 M3 and E30s with M3+8 or M3+14 bodywork.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":52654759444814,"sku":"DGMK.SPOM3E30","price":164.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/ALERONBMWM3E301.jpg?v=1743706011"},{"product_id":"aleron-de-techo-para-bmw-e46-berlina","title":"Roof spoiler for BMW E46 Sedan","description":"\u003cp data-start=\"158\" data-end=\"233\"\u003e\u003cstrong data-start=\"158\" data-end=\"233\"\u003eRoof spoiler for BMW E46 Sedan – Style, fit and European quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"235\" data-end=\"427\"\u003eGive your BMW E46 Sedan a sporty and elegant touch with this roof spoiler manufactured in Europe, designed for those looking for a balance between design, quality and functionality.\u003c\/p\u003e\n\u003cp data-start=\"429\" data-end=\"817\"\u003eThanks to its manufacture in \u003cstrong data-start=\"457\" data-end=\"469\"\u003eDuraflex\u003c\/strong\u003e, a highly resistant and flexible composite material, this spoiler combines lightness with durability, withstanding daily use without compromising its shape or integrity. In addition, its design has been carefully developed to guarantee a \u003cstrong data-start=\"713\" data-end=\"731\"\u003eprecise fit\u003c\/strong\u003e on the vehicle's roof, without the need for major modifications or adaptations.\u003c\/p\u003e\n\u003cp data-start=\"819\" data-end=\"1102\"\u003eThe product is delivered \u003cstrong data-start=\"842\" data-end=\"867\"\u003ewith a primed finish\u003c\/strong\u003e, which facilitates the preparation work before final painting. We recommend performing a slight leveling and adjustment prior to the painting process, just as would be done with any professional customization body part.\u003c\/p\u003e\n\u003cp data-start=\"1104\" data-end=\"1288\"\u003eThis spoiler not only improves the aesthetics of your E46, but it can also provide a small aerodynamic benefit by better channeling the airflow at the rear of the vehicle.\u003c\/p\u003e\n\u003cp data-start=\"1290\" data-end=\"1501\"\u003eDesigned and manufactured entirely in \u003cstrong data-start=\"1327\" data-end=\"1337\"\u003eEurope\u003c\/strong\u003e, it meets high quality standards, offering a reliable and stylish option for BMW enthusiasts who value both appearance and performance.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":53195875418446,"sku":"DG-ROOFSPOILER","price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/spoiler1.jpg?v=1751624031"},{"product_id":"aleron-de-arrastre-para-bmw-e46-coupe","title":"Drag spoiler for BMW E46 Coupé","description":"\u003cp data-start=\"139\" data-end=\"254\"\u003e\u003cstrong data-start=\"139\" data-end=\"254\"\u003e\"Drag Wing\" rear spoiler for BMW E46 Coupé – Radical aesthetics and competition-inspired performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"256\" data-end=\"631\"\u003eTransform the rear of your \u003cstrong data-start=\"290\" data-end=\"307\"\u003eBMW E46 Coupé\u003c\/strong\u003e with this eye-catching \u003cem data-start=\"339\" data-end=\"350\"\u003eDrag Wing\u003c\/em\u003e spoiler, a piece designed for those seeking an aggressive appearance and a style clearly inspired by the world of motorsport. Ideal for track builds, show cars, or radical styling projects, this spoiler gives the vehicle a dominant presence and a unique character.\u003c\/p\u003e\n\u003cp data-start=\"633\" data-end=\"941\"\u003eMade of \u003cstrong data-start=\"646\" data-end=\"658\"\u003eDuraflex\u003c\/strong\u003e, a composite material renowned for its strength and flexibility, this spoiler offers an excellent balance of rigidity, lightness, and durability. Its construction allows for easier installation and great resistance to vibrations, minor impacts, and intensive use conditions.\u003c\/p\u003e\n\u003cp data-start=\"943\" data-end=\"1237\"\u003eThanks to its optimized design, the spoiler provides a \u003cstrong data-start=\"1000\" data-end=\"1018\"\u003eprecise fit\u003c\/strong\u003e on the E46 Coupé's trunk, eliminating the need for major modifications. It is an ideal option for both tuning enthusiasts and builders looking for quality components that are easy to install.\u003c\/p\u003e\n\u003cp data-start=\"1239\" data-end=\"1514\"\u003eThe part comes with a \u003cstrong data-start=\"1271\" data-end=\"1284\"\u003eprimed\u003c\/strong\u003e finish, ready for preparation before painting. As is customary with custom bodywork components, it is recommended to fit and test the part on the car before applying paint, thus ensuring a perfect finish.\u003c\/p\u003e\n\u003cp data-start=\"1516\" data-end=\"1674\"\u003eIn addition to its visual impact, this spoiler can help improve \u003cstrong data-start=\"1587\" data-end=\"1622\"\u003estability at high speeds\u003c\/strong\u003e by generating aerodynamic downforce on the rear axle.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":53195911921998,"sku":"DG-DWALERON","price":160.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/alerondearrastree46-2.jpg?v=1751624606"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/collections\/categoria-carroceria.jpg?v=1790085398","url":"https:\/\/driftandgrip.com\/en\/collections\/carroceria.oembed","provider":"Drift \u0026 Grip","version":"1.0","type":"link"}