{"product_id":"refuerzo-trasero-chasis-bmw-e46","title":"Floor reinforcement kit for BMW E46 and M3 rear subframe mounts (for welding)","description":"\u003cp\u003eReinforcement kit for the BMW E46 floor in the area where the rear subframe is anchored. It is suitable for reinforcing a healthy floor before problems arise, or for repairing and reinforcing a floor that is already cracked. It is also suitable for the M3 E46, where it has been tested under the highest loads.\u003c\/p\u003e\n\n\u003ch3\u003eThe E46's best-known weak point\u003c\/h3\u003e\n\u003cp\u003eThe rear subframe supports the differential and the entire rear suspension, and is bolted to the car's floor. In the E46, the floor sheet metal around these mounting points is too weak for the forces it receives. Over time, it cracks, and in severe cases, the mounting points can tear out of the floor. This is one of the best-known failures of this model, especially in the M3 and in any E46 with more power or that is used for drifting or track racing.\u003c\/p\u003e\n\u003cp\u003eSymptoms usually start with knocks and noises at the rear when accelerating or lifting off the throttle, and a feeling that the rear axle is moving. If left untreated, the cracks grow until they compromise the mounting of the subframe.\u003c\/p\u003e\n\n\u003ch3\u003eReinforcement shaped to fit the floor\u003c\/h3\u003e\n\u003cp\u003eThe kit is not just flat sheets. Each piece is bent to follow the contours and folds of the E46 floor in that area, so that it rests on its entire surface and the welding remains continuous. It covers a large area around the mounting points, spreading the load over much more sheet metal than the original.\u003c\/p\u003e\n\u003cp\u003eDespite its size, the design respects the other elements that are anchored to the floor in that area, so it can be welded without having to modify or relocate other parts.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturing\u003c\/h3\u003e\n\u003cp\u003eThe parts are made from 3 mm S355 structural steel sheet, laser-cut and bent using a CNC press. The kit has been tested on an M3 E46, the model that subjects this area to the greatest stress.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe reinforcements are welded onto the original floor. To do this, the rear subframe must be lowered, the sheet metal cleaned down to bare metal, and, if there are cracks, repaired before welding the reinforcement. We recommend that this be done by a welding professional and that the area be protected afterwards with primer and paint.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series E46, including the M3 E46.\u003c\/p\u003e\n\n\u003cp\u003eShipping to Spain and all of Europe.\u003c\/p\u003e","brand":"Drift and Grip","offers":[{"title":"Default Title","offer_id":50771164135758,"sku":"DGSW.33","price":75.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/7329\/0062\/files\/1_28445706-f9f9-4d05-9e7d-028749ccc3ad.jpg?v=1793274721","url":"https:\/\/driftandgrip.com\/en\/products\/refuerzo-trasero-chasis-bmw-e46","provider":"Drift \u0026 Grip","version":"1.0","type":"link"}