- Shipping in 24-48 hSubject to availability
- 14 days to returnUnfitted and in its original packaging
- Pay in instalmentsFinance your purchase at checkout
- Collection at our shopCartagena, Spain
Front tower bar for BMW E34 sedan and Touring
€95,01
What it brings to an E34
In the E34, the top of each front shock absorber is attached to a tower, a bodywork piece inside the engine bay. The two towers are not connected to each other, so when the car leans in a corner or brakes hard, the sheet metal opens or closes by a few millimeters. This flexing alters the camber of the front wheels and is noticeable in less firm steering and a nose that takes longer to follow the steering wheel, especially in a heavy car with years like the 5 Series from this era.
By installing the bar, the two towers are tied together above the engine and move as a single piece. The front end maintains alignment with the car loaded, the line is cleaner and the steering gives more information about the grip. It is an improvement that is noticeable both in daily use and on the track or drifting, and it also distributes the load over the sheet metal of the towers, which in cars with many kilometers can end up cracking.
Manufacturing details
It is made with 40 x 20 mm oval steel tubing with a 3 mm wall. That section withstands lateral flexing very well and leaves the bar low, without rubbing against the engine. The tower brackets are laser-cut and bent in a CNC press so that they sit flat, with the mounting holes pressed so that they do not deform when tightening. The entire bar is MIG/MAG welded on a jig, so the measurements are always the same and it is installed without forcing. The finish is black powder coating, which resists the heat and dirt of the engine bay for years.
The same bar has been tested in drift and rally cars.
Compatibility
It fits the BMW E34 sedan and Touring with any engine, except those that mount the M20 engine, which are the first six-cylinder 520i and 525i (1988-1990).
- For BMW E34 sedan and Touring (except M20 engine)
- 40 x 20 mm oval steel tubing with 3 mm thickness
- Laser-cut and CNC-bent brackets, with pressed holes
- MIG/MAG welding on a jig and black powder coating
Shipping to Spain and all of Europe.