- Shipping in 24-48 hSubject to availability
- 14 days to returnUnfitted and in its original packaging
- Pay in instalmentsFinance your purchase at checkout
- Collection at our shopCartagena, Spain
Front strut tower bar BMW M3 E46 (S54) coupe and convertible
€95,01
Why the M3 E46 appreciates it
The M3 E46 is powered by the S54, a 3.2-liter six-cylinder that is heavier and bulkier than the engines in the rest of the range, and features suspension geometry designed for speed. All the loads from the front end travel up the shock towers, the two areas of the bodywork where they are mounted from above. Under hard braking and high-speed cornering, the towers move slightly relative to each other because they are only connected by the car's sheet metal. This movement alters the wheel camber at the worst possible moment and compromises the precision of steering that should be very direct in the M3.
The bar connects the two towers above the engine and forces them to move together. The front end retains its geometry under load, the front end enters corners more precisely, and the steering better communicates the grip limit. In a car that often sees track use, it also helps prevent the sheet metal around the tower mounts from fatiguing.
Construction
It is made from 40 x 20 mm oval steel tubing with a 3 mm wall thickness. This section is highly rigid against lateral forces and allows the bar to pass low over the S54.
The tower mounts are laser-cut and bent in a CNC press so that they sit flat, and their holes are countersunk and reinforced at the edges to prevent deformation when tightened. The welding is MIG/MAG jig-welded, so all bars are made to the same dimensions and fit without force. The finish is black powder coating, which withstands the heat of the engine bay, oil, and moisture.
Tested in drift and rally cars.
Compatibility
For the BMW M3 E46 with an S54 engine, both coupé and convertible. For the rest of the E46 range, you have the front tower bar for BMW E46.
- For BMW M3 E46 coupé and convertible (S54 engine)
- 40 x 20 mm oval steel tubing with a 3 mm wall thickness
- Laser-cut and CNC-bent mounts, with countersunk holes
- Jig-welded MIG/MAG and black powder coating
Shipping to Spain and all of Europe.