V1 3D adjustable aluminum camber plates for BMW E30, E34, E32, E24 and E28

SKU: DGSW30.143
Regular price €189,01 VAT incl.
Will it fit your car? Choose your vehicle and we'll tell you if this part fits.

Fits

BMW

E28E30E34E24E32
  • Shipping in 24-48 hSubject to availability
  • 14 days to returnUnfitted and in its original packaging
  • Pay in instalmentsFinance your purchase at checkout
  • Collection at our shopCartagena, Spain
Ver descripción y características

Pair of 3D adjustable top mounts in V1 version, also called camber plates, for the front axle of the BMW E30, E34, E32, E24 and E28. They replace the shock absorber top mount and allow you to adjust two settings that are fixed from the factory: front wheel camber and caster. The V1 is our version with an aluminum plate, the lightest in the range. It is a key part for preparing a drift or circuit car and very useful in stance cars with wide wheels.

What is adjusted

Camber is the tilt of the wheel viewed from the front. With some negative camber, the outer wheel supports better in a curve, when the body leans and the tire tends to stay on its edge. In lowered cars or with low-offset wheels, adjusting it also allows the wheel to fit in the wheel arch without rubbing.

Caster, or caster, is the tilt of the wheel's axis of rotation viewed from the side of the car. It directly influences how the steering wheel returns to the center. In drift, the goal is for the steering to return on its own and smoothly toward counter-steering when the driver lets go, and for the wheel to gain camber when turning a lot. With these top mounts, the caster can be adjusted until that behavior is achieved.

Why 3D

The upper mounting point of the shock absorber can be moved in several directions on the top mount, not just inward and outward. That is why camber and caster are adjusted independently, without changing one setting requiring the sacrifice of the other.

Materials and manufacturing

  • 15 mm PA6 alloy aluminum top mount plate, high strength, CNC milled and anodized in black.
  • Bearing housing CNC turned in high-quality carbon structural steel and galvanized against corrosion.
  • Stainless steel spherical ball joint with PTFE coating. It does not need maintenance, has very low play and is designed for high loads.
  • M8 fine thread mounting screws, galvanized.
  • Nuts with a washer and Schnorr lock washers, which prevent them from loosening with vibrations.

The spherical ball joint replaces the stock rubber mount. Thus the shock absorber is held without play and the steering transmits more faithfully what the wheels do. The finish combines black anodized aluminum with galvanized steel parts.

V1 or V2

These 3D top mounts are available in two versions with the same type of adjustment. The V1 has a 15 mm milled and black anodized aluminum plate, lighter and with a higher quality finish. The V2 has an 8 mm steel plate with golden galvanizing, a more economical option.

Installation

The top mounts are installed in place of the originals, on the top of the front shock absorber. When screwing the screws into the top mount, thread locker must be used. After installation and adjustment, it is essential to perform a complete front axle alignment.

Compatibility

  • BMW 3 Series E30
  • BMW 5 Series E28 and E34
  • BMW 6 Series E24
  • BMW 7 Series E32

The price corresponds to the pair, left side and right side.

Shipping to Spain and all of Europe.