V1 adjustable aluminum camber plates for BMW E36, E38, E90, E92 and E93

SKU: DGSW36.14
Regular price €169,00 VAT incl.
Will it fit your car? Choose your vehicle and we'll tell you if this part fits.

Fits

BMW

E36E38E90E92E93
  • Shipping in 24-48 hSubject to availability
  • 14 days to returnUnfitted and in its original packaging
  • Pay in instalmentsFinance your purchase at checkout
  • Collection at our shopCartagena, Spain
Ver descripción y características

Set of two V1 adjustable top mounts, or camber plates, for the front suspension of the BMW E36, E38, E90, E92 and E93. They replace the stock shock absorber top mount and add camber adjustment for the front wheels. This is a very common upgrade on E36 and E9X drift or track cars, and on stance cars that need to fit large wheels.

What is camber adjustment used for?

Looking at the car from the front, the wheels can be straight or tilted. That tilt is the camber. When the car takes a corner, the body leans outwards and the outer wheel ends up resting on the shoulder of the tire, with less rubber in contact with the asphalt. If the wheel has some negative camber, at that moment it becomes flat and grips much more.

On the E36 and E9X, the front camber is practically fixed from the factory. When lowering the car with coilovers, fitting semi-slick tires, or seeking a specific drift setup, that margin is not enough. With these top mounts, it is adjusted to what each car needs. On a stance car, it is also used to tilt the wheel so that it fits under the fender without rubbing.

Specifications

  • 15 mm PA6 aluminum plate, CNC milled and anodized in black.
  • Housing for the high-quality carbon steel bearing, CNC turned and galvanized.
  • Stainless steel spherical ball joint with PTFE coating, with reduced play, maintenance-free and suitable for high loads.
  • Zinc-plated M8 fine thread screws.
  • Nyloc nuts and lock washers so they do not loosen.

By replacing the original rubber mount with a metal ball joint, the shock absorber stops moving in its mounting. The steering gains precision and the car transmits better what is happening under the front wheels.

Other versions

This V1 has an aluminum plate, lighter and with an anodized finish. The V2 offers the same camber adjustment with a galvanized steel plate and at a lower price. If you also want to adjust the caster, which controls how the steering wheel returns when countersteering, we have the 3D top mounts in both versions.

Installation

They are mounted in place of the original top mounts, on the front shock absorbers. Put thread locker on the screws and perform a full front axle alignment after the setup.

Compatibility

  • BMW 3 Series E36
  • BMW 7 Series E38
  • BMW 3 Series E90, E92 and E93

The price corresponds to the pair, left side and right side.

Shipping to Spain and all of Europe.