The question we get most on WhatsApp isn't which wheel looks best, but whether a specific size will fit the car. Let's make it clear.
What is ET?
ET is the distance between the wheel's mounting surface, which touches the hub, and its centerline, measured in millimeters.
- High ET, for example 45: the wheel sits further inside the wheel arch.
- Low ET, for example 15: the wheel sits further out.
- Negative ET: the wheel protrudes significantly, typical of wide-offset setups.
Reducing the ET by ten millimeters moves the wheel one centimeter outward. It may seem like a small amount, but it completely changes the car's appearance and can cause rubbing on the inside.
What happens if you get it wrong
ET too high: the wheel gets close to the shock absorber and suspension. It may rub when turning or under compression, and this is a common problem on lowered cars.
ET too low: the wheel protrudes from the wheel arch. It rubs against the fender edge when driving over a pothole, wears the tire shoulder, and will fail the MOT if it sticks out from the bodywork.
In between is the sweet spot: the wheel fills the arch without rubbing inside or outside.
Width matters as much as ET
When increasing the width from 8 to 9 inches, half an inch moves inward and half an inch outward. That's why when you fit a wider wheel, you almost always need to lower the ET to compensate and prevent it from interfering with the suspension.
A practical rule: each inch of width is 25.4 mm, so an extra half-inch of width adds about 12 mm on each side.
The center hub
This is the center hole in the wheel that sits on the hub. If the wheel's center bore is larger than the car's, you need centering rings, plastic or aluminum pieces that fill the difference.
Without them, the wheel is centered only by the bolts, and this can cause vibrations at highway speeds.
The bolt pattern
PCD consists of two numbers: the number of bolts and the diameter of the circle they form. A 5x114.3 has five bolts in a circle with a diameter of 114.3 mm.
There are dual-drilled wheels that fit two different patterns, for example 5x114.3 and 5x120. And some, like many of the Japan Racing wheels, are machined to the pattern you need, allowing you to change cars without changing wheels.
A warning: a similar pattern is not a compatible pattern. A 5x112 will not fit a 5x114.3 no matter how similar it looks, and forcing it with conical bolts is a quick way to lose a wheel.
How to measure before buying
If you already have a wheel that fits, use it as a reference: check the ET and width stamped on the inner face and part of those numbers.
If you are going to fit something different, measure the clearance between your current wheel and the shock absorber, and between the wheel and the fender edge. These two measurements determine how much you can lower the ET and increase the width.
And the tire
What tire width goes with each wheel
This table shows the usual range. Use the ideal width as a starting point and always check the tire's specifications for the wheel range recommended by the manufacturer, as it varies slightly between brands.
| Wheel width | Minimum tire | Ideal tire | Maximum tire |
|---|---|---|---|
| 5.0" | 155 mm | 165 or 175 mm | 185 mm |
| 5.5" | 165 mm | 175 or 185 mm | 195 mm |
| 6.0" | 175 mm | 185 or 195 mm | 205 mm |
| 6.5" | 185 mm | 195 or 205 mm | 215 mm |
| 7.0" | 195 mm | 205 or 215 mm | 225 mm |
| 7.5" | 205 mm | 215 or 225 mm | 235 mm |
| 8.0" | 215 mm | 225 or 235 mm | 245 mm |
| 8.5" | 225 mm | 235 or 245 mm | 255 mm |
| 9.0" | 235 mm | 245 or 255 mm | 265 mm |
| 9.5" | 245 mm | 255 or 265 mm | 275 mm |
| 10.0" | 255 mm | 265 or 275 mm | 285 mm |
| 10.5" | 265 mm | 275 or 285 mm | 295 mm |
| 11.0" | 275 mm | 285 or 295 mm | 305 mm |
| 11.5" | 285 mm | 295 or 305 mm | 315 mm |
| 12.0" | 295 mm | 305 or 315 mm | 325 mm |
| 12.5" | 305 mm | 315 or 325 mm | 335 mm |
In drifting, it is common to fit a tire below the minimum width with stretched sidewalls: this protects the wheel rim's lip and allows a wider wheel to fit in the same wheel arch. For road and track use, stay within the range, because a tire that is too stretched or too wide loses precision and grip.
To choose the right compound for your use, see which tire compound is right for you.
What we need to make a recommendation
With three pieces of information, we can tell you the right size:
- Car, trim level, and year
- Suspension setup, stock or coilovers, and approximate ride height
- Whether the bodywork is stock or has widebody flares
Send us this information and we will tell you the right size, ET, and centering rings you need. It takes just a minute and could save you from having to return a set of wheels.
If you already know the size, you can find wheels grouped by size, for example 15x8, 17x9, 18x9, or 19x10.
View products: wheels, tires, and suspensions.