The tire is the only point of contact with the asphalt. You can have the best suspension and perfect geometry, but if the rubber doesn't deliver, the car won't perform. And vice versa: a good tire can make up for shortcomings in everything else.
What is treadwear?
It is a number assigned by the manufacturer that indicates, as a guideline, how long the rubber lasts. The higher it is, the harder and more durable it is; the lower it is, the softer and grippier it is.
- TW 340 or higher: hard compound, designed for the street. It holds up well to everyday use and is forgiving when you slide.
- TW 200 to 240: the middle ground. It grips considerably more than a standard tire and lasts long enough that you won't break the bank.
- TW 140 or lower: soft compound, for racing. Maximum grip, short life.
Keep in mind that each manufacturer assigns the treadwear rating using their own criteria, so it is useful for comparing within the same brand, not between different brands.
What is a semi-slick?
It is a tire with minimal tread, just enough to evacuate some water and be road legal, and a compound with much more grip than that of a standard tire.
It is marked with an E, so you can drive on it, although there are two drawbacks: it evacuates little in heavy rain and, when cold, it grips less than you expect until it reaches operating temperature.
What each one is for
Street use with a sporty driving style: hard compound, TW 300 or higher. It lasts for many miles, doesn't fall apart in summer, and responds well when you push it.
Track sessions: TW 200 to 240. It reaches operating temperature quickly, maintains its performance throughout the session, and doesn't force you to change tires every weekend.
Racing and chasing the best lap time: TW 140 or lower. It grips like nothing else, but count your laps, because its service life is short.
Drifting: here the logic changes. On the front axle you want grip, so a good compound is worth it. On the rear, what you want is for the break to be progressive and predictable, and above all, that it doesn't ruin you: a harder compound makes sense there, as it withstands more passes.
Temperature matters more than it seems
A semi-slick works well within a specific temperature range. Below it, the rubber is hard and the car will feel loose; above it, it starts to blister and loses grip.
That is where the idea of doing a warm-up lap before pushing comes from, as well as lowering pressures once the tire has reached operating temperature. If the car feels good on the second lap and falls apart on the fifth, the problem is usually temperature, not the setup.
Pressures
The pressures for a semi-slick are not the same as those recommended by the car manufacturer. The usual approach is to start slightly below and check the pressure when hot, right after finishing the session: if it has risen a lot, you were under-inflated when cold.
In drifting, the pressure on the rear axle is part of the setup. More pressure means a smaller contact patch and an easier break; less pressure means more grip and more tire wear.
What you really spend
Do the math before deciding. For example, a soft compound gives you two seconds per lap and lasts for four sessions. A medium one gives you one and a half and lasts the whole season. For most people, the second option is the one that allows you to drive more days a year, which in the end is what makes you improve.
Tell us how you use it
Tell us about the car, the wheels you have fitted, and what you do with it, and we will tell you the size and compound that fit, and what is currently available.
If you are also going to change your wheels, before choosing the tire size, check how to choose the ET and width of your wheels.
View products: tires, including those from Vitour and Zestino, and wheels. And if you are going to fit grippier rubber, check your suspensions beforehand.